ChangeLog for efftplot
===============================
Version 2.16.1 - 2005-06-07 (NW)
-------------------------------
Changes made to DEPEND for the releasetrack version
Version 2.16 - 2005-03-03 (NW)
-------------------------------
New error (NotEnoughBins) introduced that ensures that no plot is
produced if there are too few bins to create the power density
spectrum. Documentation has been updated.
Version 2.15 - 2005-01-28 (NW)
-------------------------------
Efftplot now reads and plots the corrected source RA and DEC.
Version 2.14 - 2004-12-15 (NW)
-------------------------------
Efftplot now reads the new FITS keywords SRCNUM, SRC_RA, SRC_DEC
written into the lccorr output and writes these values on the plots
produced.
Version 2.13 - 2004-11-01 (NW)
-------------------------------
New development track version. Changes made to the presentation
of the header and title of the power spectrum. The linear plot is
now shown with the same size gap between the left and right frame.
The default is that net counts are used for the fourier transform.
Version 2.10.4 - 2004-08-27 (NW)
-------------------------------
Explicitly reads the total rates and background counts before
passing the file to powspec, so that the total rates and
background rates can be checked for negative values. The user may
now choose whether the total or net counts are used to produce the
power density spectrum, via an optional parameter `bkgsub'. The
documentation has been updated.
Version 2.10.3 - 2004-08-10 (NW)
-------------------------------
Changed error calculation for the total counts, when they are
recovered from the net and background counts.
Version 2.10.2 - 2004-08-09 (NW)
-------------------------------
This version now shows a line plot, rather than points.
Version 2.10.1 - 2004-08-01 (NW)
-------------------------------
This version now accepts a user provided GTI file. It also takes
a background subtracted lightcurve and corrects the lightcurve to
have total counts (counts + background). The error bars are no
longer plotted and there is now a space between the y-axis and the
first point, when xscale=lin is chosen. Also modifications that
were being made to the FITS header of the input file are no longer
being made (SSC-SPR-3362). The documentation has duly been updated.
Version 2.10 - 2004-07-01 (NW)
-------------------------------
Revised some of the warning statements that were unnecessary
Version 2.9 - 2004-05-14 (NW)
-------------------------------
Small changes to avoid efftplot crashing with lccorr files.
Version 2.8 - 2002-07-25 (NW)
-------------------------------
Updated the DEPEND file. It now includes a dependence on sas.
Version 2.7 - 2002-06-03 (NW)
----------------------
Made the updates necessary for the new version of param
Version 2.6.1 - 22-05-01
----------------------
The documentation has been updated to include examples of how to
use efftplot.
Version 2.6 - 06-04-01
----------------------
The test harness has been changed to be variable for Linux or
Unix, because the environment variables are different. In this
way, the test can be passed on Linux or Unix.
Version 2.5.1 - 08-02-01
-----------------------
The environment variables for `pgplot' were different to those
at the `static build' and hence the test was not passed, as the
output files were different to the comparison files. The
environment variables for `pgplot' are now changed, so the
output files of the `static build' should pass the test.
Version 2.5 - 19-12-00
----------------------
Changed the test file, so that it doesn't call gs. Also changed
the header information of the files that are written out by ftools
in efftplot, so that the headers are compatible with the SAS
software.
Version 2.4 - 31-10-00
----------------------
Updated GROUPS description and the documentation
Version 2.3 - 03-10-00
----------------------
Fix the parameter and info files
Updrade the version number as required for the SAS V5
Version 2.2.1 - 27-06-00
------------------------
SSC-SPR-1818 efftplot (version 2.2): update documentation to remove non-existant link to powspec
Version 2.2 - 22-05-00
----------------------
- Add efftplot.info file in the config directory
Version 2.1 - 18-04-00
----------------------
The following SPRs have been taken into account:
- SSC-SPR-1641 efftplot (version 2.0): documentation macros
Version 2.0 - 07-03-00
----------------------
The following SPRs have been taken into account:
SSC-SPR-1565 efftplot (version 1.3): When setting the parameter
gapfill to 1, we get the error message "value 1 is not an allowed
value
SSC-SPR-1564 efftplot (version 1.3): The values in the last
incomplete data segment have an effect on the output
SSC-SPR-1563 efftplot (version 1.3): efftplot always overwrites an
existing output file
SSC-SPR-1562 efftplot (version 1.3): There is no parameter layout
file
SSC-SPR-1561 efftplot (version 1.3): File config.par is to be
updated
SSC-SPR-1560 efftplot (version 1.3): Description paragraph should
give the definition of "normalized PDS"
SSC-SPR-1559 efftplot (version 1.3): Algorithm description should
indicate which options are used to call powspec.
Version 1.4 - 16-02-00
----------------------
- Fixes SPR-1482
Version 1.3 - 26-11-99
----------------------
- Includes a DISTRIBUTION file
Version 1.2 - 11-05-99
----------------------
- DEPEND now contains taskmain (SPR 987)
- Test harness check on whether the output file exists
Version 1.1
-----------
Remarks about this version.
Fixed SPRs:
- SSC-SPR-0738
- SSC-SPR-0739
- SSC-SPR-0740
- SSC-SPR-0745
- SSC-SPR-0746
- SSC-SPR-0748
- SSC-SPR-0749
- SSC-SPR-0750
- SSC-SPR-0751
- SSC-SPR-0752
- SSC-SPR-0753
- SSC-SPR-0754
- SSC-SPR-0755
- SSC-SPR-0756
- SSC-SPR-0757
- SSC-SPR-0758
- SSC-SPR-0759
- SSC-SPR-0760
- SSC-SPR-0761
- SSC-SPR-0765
All closed on November 13th, 1998 by DB
Version 1.0
-----------
Delivered 14/10/98
Version 0.1
----------------------------
- Directory structure created by pkgmaker.