ChangeLog for omichain
===============================
Version 1.45.14 - 2006-06-09 (CB) 
--------------
	Increased the value of omdetectnsigma in the test
	harness to fix time-out failures on some platforms
	(SPR 3476)

Version 1.45.13 - 2005-05-23 (CB) 
--------------
	Ammended DEPEND file to fix build failure.
Version 1.45.12 - 2004-06-01 (CB) 
--------------
	Changed the output line "Processing exposure no .. (RUDI5)"
	to  "Processing exposure no .. (IMAGING)- further fix to
	SPR 3446.


Version 1.45.11 - 2004-06-01 (CB) 
--------------
	Changed the name of the combined source-list file to contain the
	string "COMBINED" instead of "RUDI5".  (fixes SPR 3446)

Version 1.45.10 - 2004-06-01 (CB) 
--------------
	Ammended documentation and replaced imaging-chain diagram with
	two new ones.  (fixes SPR 3328)
	
Version 1.45.9 - 2004-06-01 (CB) 
--------------
	Modified perl-script and configuration file  for new paramters
        for astrometry correction (fixes SPR 3328)
Version 1.45.8 - 2004-05-29 (VNY) 
--------------
	+(src/omichain.pl) Correction in the subroutine GetODFDirectory 
	to protect the task from a failure during its test in Mac-machines
	
Version 1.45.7 - 2004-05-27 (CB)
--------------
	 Ammended test harness to fix mac test failure
  
Version 1.45.6 - 2004-04-14 (VNY)
	 protected against uninitialized string variable SASFILE
         in lines 398-413 (fixing SSC-SPR-3286)
	
Version 1.45.5 - 2004-03-15 (CB)
--------------
	Documentation ammended.
Version 1.45.4 - 2004-02-24 (CB)
--------------
	Use DAL statement commented out.
	
Version 1.45.3 - 2004-02-01 (VNY)
--------------
	Protected from crashing when the verbosity level is higher 
	than seven.
Version 1.45.2 - 2004-01-28 (CB)
--------------        	
	Implememted Eduardo's fix to perl script to fix SPR 3236
     
Version 1.45.1 - 2004-01-19 (CB)
--------------        	
	Changed default value of parameter omdetectminsignificance
	to that used in omdetect configuration file (fixes SPR 3196)
        Ammended perl script to fix SPR 2133	
Version 1.45 - 2003-12-08 (CB)
--------------        
	"usecat" parameters to omatt & omsrclistcomb corrected.
	
Version 1.44 - 2003-12-04 (CB)
--------------        
	Correction made to perl-script in setting up directory paths.
	
Version 1.43 - 2003-12-03 (CB)
--------------        
	Data in test harness replaced to reduce execution time and 
	prevent failure due to insufficient time.
	
Version 1.42 - 2003-11-21 (CB)
--------------        
	DEPEND file ammended for ssclib 3.0
	
Version 1.41 - 2003-11-07 (CB)
--------------        
         Further modification to perl-script  to fix SPR 3162.


Version 1.40 - 2003-11-06 (CB)
--------------        
         Further modifications to perl-script  to fix SPR 3162.

Version 1.39 - 2003-11-05 (CB)
--------------        
         Perl script modified to fix SPR 3162 (problem with
	 SAS summary file).

	
Version 1.38 - 2003-08-18 (CB)
--------------        
          Documentation improved (fixes SPR 3094).
	
Version 1.37 - 2003-07-17 (CB)
--------------        
          Corrction made to perl script to fix buld problem with gc 3.3.
	
Version 1.36 - 2003-06-12 (CB)
--------------        
          Perl script corrected and some improvements made.
	
Version 1.35 - 2003-02-26 (CB)
--------------        
          Uploaded into development track
Version 1.34.7 - 2002-12-05 (CB)
--------------    
          Corrected configuration file.
Version 1.34.6 - 2002-12-04 (CB)
--------------    
          Additional small correction made to Perl script.
Version 1.34.5 - 2002-12-04 (CB)
--------------    
          Small correction made to Perl script.
	
Version 1.34.4 - 2002-12-04 (CB)
--------------    
          Modified for omatt version 2.30.
	
Version 1.34.3 - 2002-11-05 (CB)
--------------    
          Minor ammendment made to perl script for SPR 3016
Version 1.34.2 - 2002-11-05 (CB)
-------------    
	  Perl scrip ammended to fix problem identifying engineering-4 data
	  (fixes SPR 3016)
	
Version 1.34.1 - 2002-10-22 (CB)
-------------    
	  Configuration file ammended for omdetect version 4.1 (fixes SPR 3001)
	
Version 1.34 - 2002-10-17 (CB)
-------------    
	  Uploaded for release track
	
Version 1.33 - 2002-10-08 (CB) 
_____________
         + (src/omich.pl) Parameters for omdetect changed for omdetect
	 VERSION 4.0. Documentation updated. SPRs 2936 & 2904 fixed.


Version 1.32 - 2002-06-11 (CB) 
_____________
         + (src/omich.pl) Uploaded into development track to fix Jupiter problem.
	

Version 1.30.4 - 2002-05-30 (CB) 
_____________
	Documentation updated.

Version 1.30.3 - 2002-05-27 (CB) 
_____________
	+ (src/omich.pl) Fix for Jupiter problem. Documentation updated.

Version 1.30.2 - 2002-03-06 (CB) 
_____________
	+ (src/omich.pl) Added check for the existence of the file that
	  ps2pdf converts(SPR 2801).


Version 1.30.1 - 2002-01-13 (CB) 
_____________
	+ (src/omich.pl) Modified to make it look in the correct directory
	for the SAS summary file when SAS_ODF has been set to point to the
	file (fixes SPR 2751).


Version 1.30 - 2002-01-08 (CB) 
_____________
	DEPEND file ammended.

Version 1.29 - 2001-12-12 (CB) Modified to process the 
	image files for each filter in turn, in the order that the filters 
	appear in the SAS summary file. Added parameters to enable the 
	user to reduce the data for a given list of filters, or the 
	data for a given list of exposures. Output tidied up. Modified 
	so that ommosaic will run when the image files for a particular filter 
	have been processed. Intermediate file names changed so that 
	they aren't overwritten. Some product file names changed. 
	Modified to enable the user to set various parameters for
	ommodmap, omdetect, omatt, ommosaic & omsrclistcomb. Modified so that 
	omcomb runs at the beginning of an exposure if that exposure is
	engineering-2 - modified so that new image file placed in output 
	directory. Warning messages improved.
	

Version 1.28 - 2001-11-12
	+ (src/omich.pl) Modified to correct a bug in processing
	engineering-2 data files (fixes SPR 2636). Warning message tidied up.
	
Version 1.27 - 2001-10-18 SOC test problem rectified.
Version 1.26.1 - 2001-10-09 
	DEPEND file ammended to correct a build problem at the SOC.
        + (src/omich.pl) Modified so that if the environment variable
	SAS_ODF has been set to a directory the input directory is set to
	that directory. Further modified so that if the environment variable
	SAS_ODF has been set to a SAS Summary file the omichain will
	retrieve the ODF directory from that file and set the input
	directory to that file (Related to SPR 2582 for the omfchain)..
	
Version 1.26 - 2001-10-01 
        + (src/omichain.pl) Modified to process engineering mode 2 and 4
	data. For the former data, omcomb will run at the beginning of
	the chain to combine the 4 separate images into a single-one,
	which is then processed as a normal image file. The environment 
	variable SAS_ODF is now set by the script. Some bugs relating to 
	output files going to the wrong directory eradicated. Output
	tidied up. Flatfield name generated by omflatgen corrected (SPR ?) 
        + (doc) - Description file updated.
		
Version 1.25.2 - 2001-08-10
	Added WDX and THX files for exposure 018 to test data (fixes SPR 2523)
	
Version 1.25.1 - 2001-07-28
	Added task ommosaic to the DEPEND file to rectify a test-harness
	failure at the SOC (SPR 2493)
	
	
Version 1.25 - 2001-07-23
	Updated the DEPEND file and changed the data in the test harness
	(to rectify a test-harness failure at the SOC)..
	
Version 1.24 - 2001-06-15
	+ (src/omichain.pl) Changed input parameter names for running
	ommodmap and omflatfield.
	
Version 1.23 - 2001-06-14
	+ (src/omichain.pl) Code ammended to fix SPRs 2419 and 2420.
	Also ammended to prevent high-resolution central window from being
	processed by omsrclistcomb and ommosaic (SPR 2352).
	
Version 1.22 - 2001-04-04
	+ (src/omichain.pl) Print statements replaced with SAS::message
	calls. If no flatfield in directory omflatgen runs to produce one.
	

Version 1.21 - 2001-01-21
	+ (src/omichain.pl) Task "omosaic" added to produce a composite
	ski image for each filter.


Version 1.20.5 - 2000-11-10
	+ (DEPEND) ompsf removed.


Version 1.20.4 - 2000-11-09
	+ (src/omichain.pl) Output not sent to a log file.


Version 1.20.3 - 2000-11-08
	+ (src/omichain.pl) omsens removed from the chain.

Version 1.20.2 - 2000-11-07
	+ (config/omichain.info) om added.

Version 1.20.1 - 2000-11-01
	+ (src/omichain.pl) Ammended code so that if omprep fails (eg for
	an invalide filter) that observation is not processed further,
	
Version 1.20: - 2000-09-19
------------
	+(test) brought test harness data up-to-date..
	
Version 1.19: - 2000-09-19
------------
	+(test/testomprep) changed the 'export' statement.
	
Version 1.18: - 2000-09-06 (AMK)
------------
	+ (src/omichain.pl) Ammended code so that the new style house keeping files are processed correctly.
	+ (src/omichain.pl) Ammended code so that product names conform to
	specification.
	
Version 1.17.1: - 2000-06-13 (AMK)
--------------
      + (src/omichian.pl) Diverted the screen output for the task to create a file OMICHAIN.LOG.
      + (src/omichain.pl) Removed OMPSF from pipeline as none of the tasks
      in the pipeline use the output from it.
      + (config/omichain.info) added (SSC-SPR-1766).
	
Version 1.17: 05 Apr 2000

Allow input and output directories to be specified spr 1150

Version 1.17: 04 Apr 2000

Corrected erro in test script (setenv not bourne shell command)

Version 1.16: 29 March 2000

Updated documentation - spr 0898

Version 1.15: 22 March 2000

Included command line parameter interface using dal.	
	
Version 1.14: 21 March 2000

Moved OAL files to test harness and set --odf = ./.
Modified perl script at sort ODF files level.
	
Version 1.13: 10 March 2000

Set environment variable SAS_ODF in testomichain	
	
Version 1.12: 30 November 1999

Updated to conform to PPS naming convention.
	
Version 1.12: 30 November 1999

Update to use periodic housekeeping files.	
	
Version 1.11: 12 November 1999

Improve logic of chain to cope with multiple exposures, observations, etc.
Create error and warning messages.

Version 1.10: 30 September 1999

No device specified for omdetect to prevent hanging without X server.

Version 1.9: 24 September 1999

Updated file filter to accept *OMX* files.

Version 1.8: 25 August 1999

Updated OMATT dependency.
	
Version 1.7: 19 July 1999

Changed order of tasks OMATT and OMMAG
Updated TCS file in test directory.
	
Version 1.6: 16 July 1999

Updated parameter names
Changed ODF's (No longer DSS images)

Version 1.5: 15 December 1998

Removed omsumm from chain and dependancies.

Version 1.4: 14 December 1998

Updated Dependancy file RE: omsumm

Version 1.3: 10 December 1998

updated Dependancy file RE: mssllib

Version 1.2: 28 Sep 1998

SPR 523 closed: permissions changed


Version 1.1: 3 Sep 1998

Perl script changed to take into account change in omprep (v2)
parameters 

Version 1.0: 28 August 1998
	

	
Version 0.1
----------------------------

- Directory structure created by pkgmaker.