ChangeLog for omcosflag
=======================
Version 1.35 - 2018-07-17 (RDS)
------------------------------
+(src/omcosflag_mod.f90) now sets all flags in quality map to one
except where the bad pixel has the JUPITER_PATCH code. Ibn this case
it resets the value to 2048. (SCR-7496)
Version 1.34 - 2018-02-13 (EO)
------------------------------
+ This is a new major version of this package including a new GNU
Public License Text disclaimer required to distribute the SAS source
code to the Astronomical Community under the terms of the GNU Public
License. The text as it is shown below is the same that has been
included in all SAS source code files.
ESA (C) 2000-2018
This file is part of ESA's XMM-Newton Scientific Analysis System
(SAS).
SAS is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
SAS is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with SAS. If not, see <http://www.gnu.org/licenses/>.
---------------------------------------------------------------------
Version 1.33 - 2014-04-02 (EC)
- Remove unused binaries from test/
- Improve testomcosflag by removing outputs
Version 1.32 - 2013-07-10 (VNY)
+(src/omcosflag_mod.f90) further protection against
the possibility of geting a wrong binning factor;
fixed a mistake in the check of the windowDX size as
its value is always unbinned and cannot be used for
checking the binning factor. The task version 1.32
is equivelent to 1.29.3.
Version 1.31 - 2013-06-39 (VNY)
+(src/omcosflag_mod.f90) Protected against the possibility of
calculating a wrong binning factor for some OM images, which
was leading to the output quality map having wrong sizes
(continuation of solving the problem reported in SSC-SPR-7109);
the task version 1.31 is equivalent to 1.29.2
Version 1.30 - 2013-05-21 (VNY)
+(src/omcosflag_mod.f90)
Fixed a bug leading to a subscript error message for the quality array
of some full-frame high-resolution images
(SSC-SPR-7109)
Version 1.29 - 2010-01-25 (CB)
--------------------------
+src Removed some test
write statements
Version 1.28.2 - 2009-07-20 (CB)
--------------------------
+src Deleted ssc from MakeFile
to fix gcc4 build problem (forgot
to actually do it before)
Version 1.28.1 - 2009-07-20 (CB)
--------------------------
+src Deleted sscllib from MakeFile
to fix gcc4 build problem
Version 1.28 - 2009-03-18 (CB)
--------------------------
Removed "ssclib" from DEPEND file
(seems to have been in twice)
Version 1.27 - 2009-03-12 (CB)
--------------------------
Removed "sscllib" from DEPEND file
Changed QUALITY image to 16-bit for
new SAS 9 functionality.
Version 1.26 - 2007-03-05 (CB)
--------------------------
Added a rooutine to check for very bright
isolated pixels, which are flagged as
"bad pixels".
Version 1.25.2 - 2005-06-07 (CB)
--------------------------
Replaced a forall statement by do statement to fix
run-time crash on xmm-ssc
Version 1.25.1 - 2004-05-28 (CB)
--------------------------
Modified to check image for columns of zero-count
pixels and set quality flag accordingly (fixes SPR 3327)
Version 1.25 - 2003-11-21 (CB)
--------------------------
DEPEND file ammended for ssclib 3.0
Version 1.24 - 2003-11-03 (CB)
--------------------------
Fixed bug causing quality array to be set incorrectly (SPR 3161)
Version 1.23 - 2003-02-27 (CB)
--------------------------
Uploaded into development track
Version 1.22 - 2003-02-26 (CB)
--------------------------
Uploaded into development track
Version 1.21.6 2002-12-05 Corrected ZERODRIFT warning message
_________________________
Version 1.21.5 2002-12-05 (CB) Changed ZERODRIFT warning to message
(SPR 3036)
_________________________
Version 1.21.4 2002-05-28 (CB/SRR) updated documentation
_________________________
Version 1.21.3 2002-02-18 (CB) DEPEND file ammended to fix SPR 2755.
_____________________________
Version 1.21.2 2002-02-18 (CB) DEPEND file ammended to fix SPR 2755.
_____________________________
Version 1.21.1 - 2002-01-27 (CB)
_______________________________
Configuration file ammended (fixes SPR 2719)
Version 1.21 - 2002-01-08 (CB)
------------
DEPEND file modified for ssclib.
Version 1.20 - 2001-12-13 (CB) No changes - uploaded to keep Guiseppe happy
------------
Version 1.19.2 - 2001-10-18 (CB)
------------
+(src/omcosflag_mod.f90) Check added to stop 2nd subscript of
array binnedBadPixMap going out of range. Fixes SPR ?.
Version 1.19.1 - 2001-07-12 (CB)
------------
+(src/omcosflag_mod.f90) Check added to stop 2nd subscript of
array qualArrayP going out of range by 1. Fixes a problem that
occurred with cycle 122 data run at Leicester (program runs okay
on this data at MSSL).
Version 1.19 - 2001-06-18 (CB)
------------
+(src/omcosflag_mod.f90) Modified to check the image array
for "missing" and "negative-valued" pixels and to modify the
quality-map array accordingly. Also modified to use the new
version of "getStartendExposure" in mssllib.
Version 1.18.1 - 2000-11-07 (CB)
------------
+(config/omcosflag.info) "om" added.
Version 1.18 - 2000-08-30 (AMK)
------------
+(src/omcosflag_mod.f90) Initialise qualArrayP and corrected
the initialisation of the quality array.
Version 1.17.4 - 2000-06-21 (AMK)
--------------
+ (config/omcosflag.info) - modified (SSC-SPR-1858)
Version 1.17.3 - 2000-06-14 (AMK)
+ (doc/omcosflag_description.tex) - corrected error messaging
(SSC-SPR-1781)
+ (src/omcosflag_mod.f90) - introduced new keyword
'deAllocationError' for warnings.
Version 1.17.2 - 2000-06-13 (AMK)
--------------
+ (doc/omcosflag_description.tex) - changed `fatal' to 'error'
SSC-SPR-1771
Version 1.17.1: 9th June 2000 (AMK)
Added clean-up for allocated memory
Checked and corrected implementation of bad pixel map
Version 1.15: 11th April 2000
Modified 'zero drift' algorithm
Version 1.14: 2nd March 2000
Modified algorithm to cope with no drift file
Version 1.13: 16th December 1999
Updated test harness wrt new CCF for bad pixels
Added new parameter timeSample
Version 1.12: 2nd December 1999
Added DISTRIBUTION (world) file
Version 1.11: 8th June 1999
Updated dependancies for V3.
Version 1.10: 18th May 1999
Removed CAL call to open CCF.
Changed fatal datamode message.
Version 1.9: 14th May 1999
Update shift and add process.
Version 1.8: 20th April 1999
'Spring clean' of code (tidy, comment and fix bugs).
Changed input parameters to conform to new standards.
Added checks on input file types.
Update testomcosflag and checkoutput for new dataset.
Version 1.7: 26th March 1999
removed accuracyLevel=LOW
Version 1.6: 10th December 1998
updated Dependancy file RE: mssllib
Version 1.5: 28th July 1998
images moved to primary array
Version 1.4: 16th June 1998
SPR 407 closed: test harness now checks values
SPR 406 closed: .par file changed
SPR 405 closed: permissions changed
Version 1.3: 21 May 1998
ChangeLog added
DEPEND edited
Version 1.2: 7 May 1998
SPR 217 closed: Test harnesses updated
SPR 223 closed: see 217
Version 1.1: 27 April 1998
SPR 218 closed: access privs changed
SPR 219 closed: .par file included
SPR 221 closed: obselete comments and workrounds removed
SPR 222 closed: datestamp removed
Version 1.0: 20 March 1998
Original version submitted to the SOC