ChangeLog for omprep
====================
Version 2.48 - 2018-02-13 (EO)
------------------------------
+ This is a new major version of this package including a new GNU
Public License Text disclaimer required to distribute the SAS source
code to the Astronomical Community under the terms of the GNU Public
License. The text as it is shown below is the same that has been
included in all SAS source code files.
ESA (C) 2000-2018
This file is part of ESA's XMM-Newton Scientific Analysis System
(SAS).
SAS is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
SAS is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with SAS. If not, see <http://www.gnu.org/licenses/>.
---------------------------------------------------------------------
Version 2.47 - 2016-07-18 (AI)
------------------------------
+ (src/omprep_mod.f90) gfortran compatibility changes applied.
Version 2.46.1 - 2014-09-09 (RDS)
------------------------------
+(src/checkpath.cc): checked for the LAST occurrence of the
"_OM" string when finding the exposure number to avoid problems with
directories which contain this string - SPR-7078
------------------------------
Version 2.46 - 2013-07-13 (VNY)
------------------------------
+(src/omprep_mod.f90): introduced an additional protection against the possibility
of calculating a wrong binning factor for full-frame high-resolution.
------------------------------
Version 2.45 - 2012-07-19 (VNY)
------------------------------
+(src/omprep_mod.f90): checked the initialisation of variables
dummyTHXFlag and others; propagated the keywords BFASTID
and SAMPTIME in the output file header
------------------------------
Version 2.44 - 2011-03-24 (VNY)
------------------------------
+(src/omprep_mod.f90): Correcting the task behaviour for modeset=3
in which case the task should ignore the parameter rawattitude
------------------------------
Version 2.43 - 2011-03-23 (VNY)
------------------------------
+(src/checkpath.cc): ensured that the run-time
exception error in checkpath.cc is fixed; the code is made
compatible with SUN OS
------------------------------
Version 2.42 - 2011-03-22 (VNY)
------------------------------
+(src/omprep_mod.f90): fixed a run-time
exception error caused by an interface between C++ and Fortran-90
-------------------------------
Version 2.41 - 2011-03-21 (VNY)
-------------------------------
+(src/omprep_mod.f90): fixed a syntax error
------------------------------
Version 2.40 - 2011-03-18 (VNY)
------------------------------
A new parameter (rawattitude) is included to allow using the
raw attitude data file (RAF); the possible values of this
parameter are 0,1 or 2:
0- for use the current setting of the SAS_ATTITUDE variable,
1- for using the average of the first 20 seconds of the raw attitude
data and 2- for using the average over the entire time span of
the exposure (SSC-SPR-6652).
Version 2.39 - 2010-08-19 (VNY) fixing a bag which might lead to
a wrong exposure ID in the header of the output file.
Version 2.38.2 - 2009-06-01 (VNY) Adding a warning message for the cases
when a binning factor in the WDX table was found wrong
(SSC-SPR-6541)
Version 2.38.1 - 2009-05-20 (VNY) Protected againt the possibility of
picking up wrong binning factors from the WDX-tabele (SSC-SPR-6541)
Version 2.38 - 2009-02-10 (CB)
------------------------------
Deleted ssclib from DEPEND file to
fix build problem on xmac02 machine
(Hadn't noticed it was in the file twice)
Version 2.37 - 2009-02-10 (CB)
------------------------------
Deleted ssclib from DEPEND file to
fix build problem on xmac02 machine
Version 2.36 - 2005-11-10 (vny)
-------------------------
+(src/omprep_mod.f90) Protected against oscillating sign
of FTFINE caused by telemetry drops (FAST-regime, SSC-SPR-3505)
Version 2.35.1 - 2005-10-25 (cb1)
--------------------------------
+(src/omprep_mod.f90) Ammended program so that Engineering-4
data only the keywords BINAX1, BINAX2, BINBPE, WINDOWDX and
WINDOWDY are set to what they should be, thus overcoming
problems with missing/incorrect attributes in the input
image header. (fixes SPR-3532)
Version 2.35 - 2005-08-17 (cb1)
--------------------------------
+(src/omprep_mod.f90) minor modifications to the way the exposure-
identifier string is obtaine (fixesSSC-SPR-3502)
Version 2.34.5 - 2005-06-09 (vny)
--------------------------------
+(src/omprep_mod.f90) minor modifications to the warning messages
(some of them contained undefined strings - SSC-SPR-3472)
Version 2.34.4 - 2005-03-02 (cv)
--------------------------------
+(src/omprep_mod.f90) Further Minor modification made
to fix SPR 3438 (CB)
Version 2.34.3 - 2005-02-21 (VNY)
--------------------------------
+(src/omprep_mod.f90): The task
is adjusted to work woth the Engineering-4 data (SSC-SPR-3443)
Minor modification also made to fix SPR 3438 (CB)
Version 2.34.2 - 2004-06-29 (VNY)
---------------------------------
A bug is fixed, which was leading to a wrong window sizes
in the DETSEC-keyword (SSC-SPR-3345).
Version 2.34.1 - 2004-01-27 (CB)
------------------------------
String comparison between set and DUMMYTHX.FIT changed
to use string INDEX function (fixes SPR 3229).
Version 2.34 - 2003-11-21 (CB)
------------------------------
DEPEND file ammended fro ssclib 3.0
Version 2.33 - 2003-10-24 (VNY)
------------------------------
The parameter modeset can be set to 4 in order to work with the grism
images (filters GRISM1 or GRISM2 or, respectively 1000 and 200);
the task is prepared to be used for processing grism
data (SAS-SCR-116)
Version 2.32 - 2003-06-16 (VNY)
--------------------------------
Added a check of the dummyTHXFlag before extracting
the exposure identifier by the routine GetExposureIdentifier
(fixes SSC-SPR-3132). If the THX-file is dummy, then the
exposure identifier is extracted from PEH-file.
Version 2.31 - 2003-06-03 (CB)
--------------------------------
Added keyword DATATYPE tp output (fixes SPR 3125)
Version 2.30 - 2003-02-26 (CB)
--------------------------------
Uploaded into development track
Version 2.29.2 - 2002-12-12 (CB)
--------------------------------
Documentation ammended (fixes SPR 3055)
Version 2.29.1 - 2002-12-12 (CB)
--------------------------------
Fixes a bug that has come to light in Leicester pipeline testing.
Version 2.29 - 2002-10-17 (CB)
--------------------------------
Code tidied up
Version 2.28 - 2002-10-08 (CB)
--------------------------------
+(src/omprep_mod.f90) - Modified to store
ccd frametime & dead fraction in image header
for omdetect version 4.0
Version 2.27 - 2002-10-03 (CB)
--------------------------------
Modified DEPEND file..
Version 2.26 - 2002-06-10 (CB)
--------------------------------
Modified config and depend file for param version 2.0.
Version 2.25.4 - 2002-05-28 (CB/SRR)
------------------------------------
Documentation updated.
Version 2.25.3 - 2002-03-14 (CB)
--------------------------------
Documentation corrected.
Version 2.25.2 - 2002-02-21 (CB) -
+(src/omprep_mod.f90) - Modified to output additional keywords for
SCR 84 and also the keyword "EXPIDSTR" (fixes SPRs 2269 & 2270).
Version 2.25.1 - 2002-01-28 (CB) -
Ammended configuration file (fixes SPR 2721)
Version 2.25 - 2002-01-25 (CB) -
+(src/omprep_mod.f90) - Modified so that only 1 warning message
about negative-pixel values outputted (SPR 2706).
Version 2.24 - 2002-01-07 (CB) - DEPEND file modified for ssclib
Version 2.23 - (CB) - No changes - uploaded to keep Guiseppe happy.
Version 2.22.3 -
+(src/omprep_mod.f90) 1-pixel difference in the calculation of
DETSEC parameter has been rectified. Check added to ensure exposure
time is not zero- if it is then time obtained fro getstartendexp-
if still zero program aborted (fixes SPR 2664)
Version 2.22.2 - 2001-10-10 Further mod to DEPEND file to rectify SOC build problem.
Version 2.22.1 - 2001-10-09 DEPEND file modified to rectify SOC build problem.
Version 2.22 - 2001-09-25
+(src/omprep_mod.f90) Modified so that it now picks up the BINBPE
parameter directly from the image file (fixes SPR 2565). It also now
gets the exposure time directly from teh image file. Can now process
Rudi-5 images and engineering 2 and 4 data. Code tidied up.
Version 2.21.1 - 2001-07-31
+(src/omprep_mod.f90) OAL_toAttributeMatrix call has been eliminated
(the MATRIX array was not used in the programme),
dependencies have been actualised. RA_PNT and DEC_PNT keywords
changed to RA_SCX and DEC_SCX for FITS consistency.
Version 2.21 - 2001-07-25
-------------------------
+(src/omprep_mod.f90) Program modified to process fast-imaging data
(for fast-chain- PHA column added to output file, TLMIN & TLMAX parameters changed
for evselect, DETNAM set to REDUNDANT and various checks added,
instrument mode integer variable added). Code tidied up.
Version 2.20 - 2001-06-18
-------------------------
+(src/omprep_mod.f90) Keyword "BLANK" changed to "MISSPIX"- fits
has always complained about the former. Also, code modified for the
fast-chain- argument list to sub getstartendexp modified.
Version 2.19.5 - 2001-03-07
-------------------------
+(src/omprep_mod.f90) For IMI files, the routine now checks that
the actual image size equals that computed from the header
parameters "WINDOWDX", WINDOWDY", "BINAX1", "BINAX2" and the
binning parameter binBPE- if not a fatal error message is
displayed. Done to stop omichain terminating because of a data
problem (SPR 2245)
Version 2.19.4 - 2001-03-06
-------------------------
+(src/omprep_mod.f90) Routine getExposureStartRow revised.
Version 2.19.3 - 2001-03-01
-------------------------
+(doc/omprep_description.tex) List of error messages updated.
Version 2.19.2 - 2001-01-11
-------------------------
+(src/omprep_mod.f90) Correction made to list of filters that
omprep will not process.
Version 2.19.1 - 2001-01-10
-------------------------
+(src/omprep_mod.f90) Filters "GRISM2" and "FILTER_MAGNI" added to the
list of filters that omprep will not process.
Version 2.19 - 2000-12-14
-------------------------
+(src/omprep_mod.f90) Timing attributes added to the data set (SPR 2085)
Version 2.18.7 - 2000-11-14
-------------------------
+(src/omprep_mod.f90) DETNAM now set to REDUNDANT, instead of
PRIME, if chain equal to 1/
Version 2.18.4 - 2000-11-07
-------------------------
+(src/omprep_mod.f90) Initialised "att" parameters to zero to
solve problem with omslewchain..
Version 2.18.3 - 2000-11-01
-------------------------
+(src/makefile) Changed ordering of libraries.
Version 2.18.2 - 2000-11-01
-------------------------
+(src/omprep_mod.f90) Check made to ensure that the filter is a
valid one - program aborts if not (SPR 2016).
Version 2.18.1 - 2000-10-18
-------------------------
+(src/omprep_mod.f90) Several variables that were used when program
was running in the omichain, but not in the omslewchain (causing
the chain to crash), initialised - (SPR 1987).
Version 2.18 - 2000-10-11
-------------------------
+(src/omprep_mod.f90) Removed test write statements.
Version 2.17 - 2000-10-11
-------------------------
+(test) SSC-SPR-1978. Brought the data in the test harness
up-to-date. Data is taken from the reprocessed cycle 0070.
Version 2.16 - 2000-10-02
-------------------------
+(src/omprep_mod.f90) changed call to getstartendexp which now
returns the filter. Removed redundant code that determined the
filter from the HK file.
Version 2.15 - 2000-09-19
-------------------------
+(test/testomprep) changed 'export' statement.
Version 2.14 - 2000-08-30
-------------------------
+ (src/omprep_mod.f90) added additional code to deal with the case
when a tracking history file is not present. A dummy tmp_tracking file
is created in this case. The ZERODRIFT option is then implemented.
+ (src/omprep_mod.f90) implemented the above for the Slew option.
+ (src/omprep_mod.f90) added the keyword BLANK to the output image
files. The BLANK keyword is required by OMFLATFIELD in order to
process the quality array.
--------------------
Version 2.13.3 - 2000-07-19
--------------
+ (src/omprep_mod.f90) added boolean parameter "slewtest" to
handle slew data.
--------------------
Version 2.13.2 - 2000-06-21 (AMK)
--------------
+ (src/omprep_mod.f90) (SSC-SPR-1864) added various OAL calls to determine the
exposure start time, end time and exposure length.
Version 2.13.1 - June 12th 2000 - (AMK)
added info files top task - SPR 1766
Version 2.13.1 - June 12th 2000
Removed hardwiring of dimension of 10 for maximum number of guide stars
although this was correct. WE saw some data with a maximum of 16. The code
now works out the maximum dimension size from the data and uses this.
Version 2.13.1 - June 12th 2000 (AMK)
Implemented calls to OAL_getodInfo and OAL_getAttitude to get telescope attitude.
version 2.13: 17th April 2000
Ammended Documentation for fatal errors.
SSC-SPR-1667
version 2.13: 13th April 2000
Added code to support 'no tracking history' option.
version 2.12: 7 Jan 2000
closed SPR 1410 - replaced remaining --odfdir in test harness
version 2.11: 6 Jan 2000
Added extra extension (RAW) to take copy of image array. This will remain
unaltered by following tasks and be used by omdetect
version 2.10: 3 December 1999
Added DETSEC and DETSIZE keywords to allow ds9 mosaicing. (Warning: Still some
binning issues need solving with this)
Version 2.9: 2 December 1999
Added DISTRIBUTION (world) file
Replaced old PEH file with new PEH configuration.
Changed --odfdir to --odf in test harness.
Version 2.8: 30 July 1999
Update task to read Filter Wheel Position and Acquisition Mode from
Periodic Housekeeping file.
Version 2.7: 21 July 1999
Task now writes SAMPTIME and BFASTID keywords to fastmode event list.
Task now calls getexposure instead of getstartendexp
Version 2.6: 8th June 1999
Updated dependancies for V3.
Version 2.5: 18 May 1999
Removed dependancies on filename checking, used DAL call 'hasBlock' instead.
Removed odfdir parameter and CAL call to open CCF.
Version 2.4: 20 April 1999
Added 'oalodf' directory to 'test' directory and change test command to use
local odf.
Changed parameters names to conform to new convention.
Version 2.3: 12 April 1999
'Spring clean' of code (tidy, comment and fix bugs).
Changed input parameters to conform to new standards.
Changed input to detect either image, fast mode or tracking history files.
Added checks on input file types.
Corrected exposure time calculation.
Update testomprep and checkoutput for new dataset.
Version 2.2: 26 March 1999
Changed rvec(sciwin - 1, 0) -> rvec(sciwin, 0)
Version 2.1: 10 Dec 1998
Changed dependancies for mssllib-2.0
Version 2.0: 3 Sep 1998
Changed to deal with OM FAST mode event list ODF as well as imaging mode
NB task parameters changed
Version 1.7: 27th Aug 1998
SPR 522 closed: omprep now looks for keywords in image extension of ODF
unused keywords no longer read
Version 1.6: 28 July 1998
images moved to primary array
Version 1.5: 7 July 1998
SPR 477 closed: omprep.tex restored to original format
Version 1.4: 16 June 1998
SPR 432 closed: test harness now checks some keywords
SPR 430 closed: psw comments deleted
SPR 428 closed: bibliography calls removed from documentation
SPR 427 closed: .par file changed
Version 1.3: 21 May 1998
DEPEND edited
ChangeLog added
Version 1.2: 8 May 1998
Test harness changed
Version 1.1: 27 April 1998
SPR 247 closed: datestamp call removed
Version 1.0: 20 March 1998
Original version submitted to SOC