SAS Release Notes - SAS 12.0.1

               Release Note for patched version SAS 12.0.1
	       =================================================

		         Carlos Gabriel  
	                 XMM-Newton SOC
          
A patch to the newly released SAS 12.0.0 version has to be issued, due 
to following reasons:

 
We took the opportunity to establish "ellbeta" (aka 2D-PSF) as default PSF mode parameter in the call 
to edetect_chain and also to upgrade the documentation of several tasks.


 

Package arfgen: version 1.83.4 [was 1.83.3]
Package barycen: version 1.20.2 [was 1.20.1]
Package catcorr: version 0.4.4 [was 0.4.3]
Package eboxdetect: version 4.22.3 [was 4.22.2]
Package edetect_chain: version 3.12.2 [was 3.12.1]
Package eexpmap: version 4.6.5 [was 4.6.4]
Package emask: version 2.13.3 [was 2.13.2]
Package emldetect: version 5.17.4 [was 5.17.3]
Package epatplot: version 1.16.1 [was 1.16]
Package ewavelet: version 3.11.2 [was 3.11.1]
Package rgslccorr: version 0.52.1 [was 0.52]
Package sas: version 1.545.1 [was 1.545]
Package arfgen: version 1.83.4 [was 1.83.3]

ChangeLog

Version 1.83.4 - 2012-06-18 (RDS)
------------
	+ (src/ConcreteArfDataServer.cc) - Fixed problem with the PSF 
					   calculation for the FAST modes
					   where a subset of the full-Y
					   range is taken. (SPR-6733)

Version 1.83.3 - 2012-05-17 (RDS)
------------
	+ (src/ConcreteArfDataServer.cc, - Put some logic into the calculation
	   config/arfgen.par)		   of the default badpixresolution to
				   	   make it fine (0.5") if a PSF corr is
					   being calculated and coarse (2") if
					   it isn't. (SPR-6729)


Package barycen: version 1.20.2 [was 1.20.1]

ChangeLog

Version 1.20.2 - 2012-06-15 (RDS)
------------
	+ doc/barycen_description.tex		Added warnings into documentation
						(SPR-6740)

Version 1.20.1 - 2012-05-11 (AI)
------------
	+ Heliocentricorr documentation updated.
	+ Heliocentricorr parameters modifed.
	

Package catcorr: version 0.4.4 [was 0.4.3]

ChangeLog

Version 0.4.4 - 2012-06-14 (CGP/LUX)
----------------------
- Improved warning and error messages, extended documentation.

Version 0.4.3 - 2012-05-21 (CGP/LUX)
----------------------
- Adds physical units to columns RA_CORR, DEC_CORR, LII_CORR, BII_CORR, ref SPR 6727


Package eboxdetect: version 4.22.3 [was 4.22.2]

ChangeLog

Version 4.22.3 - 2012-06-18 (IT)
---------------------------------

	+ Documentation: Typographical and formal corrections,
	  fixed broken Errors Section.
	

Version 4.22.2 - 2012-03-27 (IT)
-------------------------------                                                                                                                                                                                       
	+ Marked parameter mergedlistset as "not yet implemented" in
	  documentation and parameter file (SPR-6571)
	+ Added parameter descriptions to documentation
	  (withimagebuffersize, imagebuffersize, SPR-6700)
	+ Removed unused imagebuffersizesets entry from parameter file:
          parameter is "imagebuffersize" (SPR-6700)

	

Package edetect_chain: version 3.12.2 [was 3.12.1]

ChangeLog

Version 3.12.2 - 2012-06-19 (IT)
--------------
	+ Copy of version 3.13; version number changed for the patch.


Version 3.13 - 2012-05-29 (IT)
--------------

	+ Changed default value of parameter psfmodel to ellbeta
	  (SPR-6742).
	+ Documentation: Minor corrections.
	
	
Version 3.12.1 - 2012-03-26 (IT)
--------------                                                                                                                                                                                                       

	+ Included parameters withimagebuffersize, imagebuffersize for
	eboxdetect and emldetect (SPR-6549)
	+ Updated documentation: replaced dead link (SPR-6491, SPR-6629),
	adjusted ecf example values, added information on parameters,
	added task links to parameter list, removed typos

	


Package eexpmap: version 4.6.5 [was 4.6.4]

ChangeLog

Version 4.6.5 - 2012-06-11 (IT)
-------------------------------

	+ Documentation: Typographical and grammatical corrections. Fixed
	  formal bug which broke the latex run.


Version 4.6.4 - 2012-03-23 (IT)
-------------------------------

	+ Finally removed description of obsolete parameter pattern from
	  the documentation (SPR-6518)
	


Package emask: version 2.13.3 [was 2.13.2]

ChangeLog

Version 2.13.3 - 2012-06-16 (IT)
---------------------------------

	+ Documentation: Typographical, grammatical, and formal corrections.
          Fixed broken Errors Section (SPR-6741).
	  Made consistent with parameter file.

Version 2.13.2 - 2011-02-14 (RS)
---------------------------------

	+ src/emask_mod.f90

	Copies some keywords from the MASK array to the PRIMARY header
	which are needed in detection tasks (SCR-314)


Package emldetect: version 5.17.4 [was 5.17.3]

ChangeLog

Version 5.17.4 - 2012-06-13 (IT)
--------------
	+ Documentation: Typographical and grammatical corrections (closes
	  SPR-6731) plus updates in form and content.


Version 5.17.3 - 2012-05-13 (IT)
--------------
	+ Corrected bug in emlfit.f90 which caused wrong / zero count
	  rates in very rare cases (e.g. ObsID 0110010701): array indices
	  used for creating the output source list could be wrong after
	  removing a spurious detection from the list (SPR-6724)



Package epatplot: version 1.16.1 [was 1.16]

ChangeLog

Version 1.16.1 - 2012-06-15 (AI)
------------------------------

	- (src/epatplot_mod.f90): "CALstat_node" variable initialization in
	case of MOS analysis.
	- (test/epatplot_mos_test): New MOS test harness added.

	
Version 1.16 - 2010-02-24 (HB)
------------------------------

- (doc/epatplot_description.tex): three example plots were updated; 
	                          this closes SPR-6590
	


Package ewavelet: version 3.11.2 [was 3.11.1]

ChangeLog

Version 3.11.2 - 2012-06-18 (IT)
--------------------------------
	+ Documentation: Figures were missing in html version of the
	  documentation. Minor formal and typographical corrections.


Version 3.11.1 - 2012-03-26 (IT)
--------------------------------

	+ Correct default value and ranges for parameter edgethreshold in
          documentation (SPR-6570)


Package rgslccorr: version 0.52.1 [was 0.52]

ChangeLog

Version 0.52.1 -  2012-06-08 (AI) 
-------------
	+ Attribute keyword HDUCLAS2 changed to NET in case bkg subtraction is applied.
	
Version 0.52 -  2010-07-21 (AI) 
-------------
	+ Bug fixed when only order 2 is selected and the wavelength filtering is enabled.
	SOC-SPR-6623 fixed
	

Package sas: version 1.545.1 [was 1.545]

ChangeLog

Version 1.545.1 - 2012-06-21 (EO)
---------------
	+ AKA: 12.0.1. 
	  Patched version of SAS 12.0.0 with the following updated packages:
	  - arfgen-1.83.4
	  - rgslccorr-0.52.1
	  - epatplot-1.16.1
	  - catcorr-0.4.4
	  - barycen-1.20.2
	  - eexpmap-4.6.5
	  - edetect_chain-3.12.2
	  - emldetect-5.17.4
	  - emask-2.13.3
	  - ewavelet-3.11.2
	  - eboxdetect-4.22.3

Version 1.545 - 2012-05-23 (EO)
-------------
	+ configure_install: Added 1 to exit due to error, to allow capture of error by
	  the installation script 'install.sh".