Release note for pipeline 02000050/20021220.132037 The previous production pipeline (04000010/20020508.121539, prod2) used SAS 5.3.2, that is xmmsas_20020507_1701. The new pipeline started operations on 20/12/02. It uses SAS 5.4, that is xmmsas_20021218_1802 (but see below). The pipeline is prod version 02000050/20021220.132037. The task ppssumm-2.3.7 will not run under SAS 5.4 for reasons which are not yet understood, thus ppssumm-2.3.7 from SAS 5.3.4 (xmmsas_20021111_1801) has been used in its place. Details: -------- Prev pipeline New pipeline 04000010/20020508.121539 02000050/20021220.132037 # # Modules # ------ # ECombSrcDet [none] 1.22 # Version 1.22 - 2002-09-13 (DJF) # + Fixed instrument dependency. # Version 1.21 - 2002-09-12 (DJF) # + Added parameter to esplinemap, scut => 0.001 # + Changed module name to ECombSrcDet # + Changed evaluateRules to test MakeImage rather than ExpDetect # Version 1.14 - 1.20 - 2002-07-29 (DJF) # + return ignore rather than exception during test phase # so as not to interfere with normal processing # + Added rudimentary hardness ratio decission making. # + Added use of fileExists to confirm existence # of files outside of database # + Debugging # Version 1.13 - 1.16 - 2002-06-28 (DJF) # + More Debugging # Version 1.3 - 1.12 - 2002-06-27 (DJF) # + More Debugging # Version 1.2 - 2002-06-26 (DJF) # + Debug code addded # Version 1.1 - 2002-06-24 (DJF) # + changed instrument dependance # Version 1.00 - 2002-06-13 (DJF) # + First version. # # ExpDetect 1.28 1.33 # Version 1.33 - 2002-09-16 (DJF) # + Remove code for testing spline node variations # Version 1.32 - 2002-08-27 (DJF) # + Fix background image list for testing of esplinemap # Version 1.31 - 2002-08-23 (DJF) # + Try different node values in esplinemap # Version 1.30 - 2002-08-16 (DJF) # + Change to esplinemap parameters. Use scut = 0.001 rather than default # + Added call to esplinemap and eboxdetect for different number of nodes. # Version 1.29 - 2002-06-10 (DJF) # + Incorporating catalog pipeline improvements into the production pipeline # (See patch versions below for further details) # Version 1.28.12 - 2002-05-08 (DH) # + Remove eposcorr call for ml exposure source lists # Version 1.28.11 - 2002-05-02 (DH) # + Add pimin and pimax parameters to the esplinemap call. # Version 1.28.10 - 2002-04-30 (DH) # + Fix typo. # Version 1.28.9 - 2002-04-26 (DH) # + Make sure implot only tries to plot FITS files. # Version 1.28.8 - 2002-04-26 (DH) # + Put oot options back in esplinemap. # Version 1.28.7 - 2002-04-26 (DH) # + For now remove oot options from esplinempap, unitl bug # is fixed. # Version 1.28.6 - 2002-04-25 (DH) # + Bug fix. # Version 1.28.5 - 2002-04-24 (DH) # + Shorten name of intermediate image event lists to # accomodate a bug in esplinemap. # Version 1.28.4 - 2002-04-19 (DH) # + Add ml list and exp map graphics products. # + Add new feature in esplinemap for handling oot events. # Version 1.28.3 - 2002-03-29 (DH) # + Correct spelling of eposcorr. # Version 1.28.2 - 2002-03-29 (DH) # + Bug fixes for 1.28.2. # + For extended source detection, need to do a call to eboxdetect # as well as emldetect. # + Add in call to eposscorr to correct source positions # Version 1.28.1 - 2002-03-28 (DH) # + Call to esky2det and extended source detection on xid band. # # Finalize 1.18 1.19 # Version 1.19 - 2002-02-26 (DH) # + added additional output to logs to indicate progress # # ImageMerge 1.12 1.14 # Version 1.14 - 2002-13-11 (DJF) # + implot parameter changes. Merged plotfile/Device # Version 1.13 - 2002-12-11 (DJF) # + Change implot parameter withsrclistset to withsrclisttab (SAS 5.4) # # MakeImage 1.37 1.58 # Version 1.58 - 2002-12-13 (DJF) # + Only take copy of un-filtered flare GTI if it exists # Version 1.57 - 2002-12-13 (DJF) # + implot parameter changes. Merged plotfile/Device # Version 1.56 - 2002-12-11 (DJF) # + Change implot parameter withsrclistset to withsrclisttab (SAS 5.4) # Version 1.55 - 2002-11-04 (DJF) # + Remove PNG plot of flare background timeseries # Version 1.54 - 2002-11-01 (DJF) # + returned OUT_OF_FOV filter to band 8 fov images # Version 1.53 - 2002-10-18 (DJF) # + Changed copy of pre-flare screened event list to use newFile not findFile # Version 1.52 - 2002-10-18 (DJF) # + fix parameters for flare background plot GIFtoPNG call # Version 1.51 - 2002-10-18 (DJF) # + change fplot yparm from COUNT to COUNTS. # Version 1.50 - 2002-10-18 (DJF) # + Test for flare background content was looking for cwrong extension name. # changed to 'RATE' # Version 1.49 - 2002-09-16 (DJF) # + Added plot of flare background timeseries product. # + Test whether short GTI removal leaves an empty GTI table. # do not apply flare screening if this occurs. # + readjusted flags. # Version 1.48 - 2002-09-16 (DJF) # + Replaced missing pn event selection flags # Version 1.47 - 2002-09-16 (DJF) # + Fixed pn band 8 image name. Added axtra comments for debugging. # Version 1.46 - 2002-07-23 (DJF) # + Fixed unmatched parentheses in selection expression # Version 1.45 - 2002-07-19 (DJF) # + More debugging # Version 1.44 - 2002-07-19 (DJF) # + More debugging # Version 1.43 - 2002-07-19 (DJF) # + More debugging # Version 1.42 - 2002-07-11 (DJF) # + Added debugging statements # Version 1.41 - 2002-07-05 (DJF) # + Removed debugging statement # Version 1.40 - 2002-07-05 (DJF) # + Changed pn selection flags to use #XMMEA_EP + OUT_OF_FOV # + Rearanged code to make it easier to read # Version 1.39 - 2002-07-01 (DJF) # + Added #XMMEA_EM filtering to EMOS Band 1-5 images # Version 1.38 - 2002-06-10 (DJF) # + Shorten name of intermediate image event lists to # accomodate a bug in esplinemap. # # OMExpAnalyse 1.04 1.05 # Version 1.05 - 2002-02-22 (DJF) # + omprep, change from default modeset=0 to modeset=3 # # OMFastAnalyse 1.20 1.22 # Version 1.22 - 2002-10-25 (DH) # + omprep, change modeset=3 to modeset=1 # got it wrong, 3 is for tracking # Version 1.21 - 2002-10-25 (DH) # + omprep, change modeset=1 to modeset=3 # + omdetect, remove parameters: boxscale , outputregionfile # # OMImageAnalyse 2.22 2.29 # Version 2.29 - 13-Dec-2002 (DJF) # + implot parameter changes. Merged plotfile/Device # Version 2.28 - 11-Dec-2002 (DJF) # + Remove redundant omdetect parameters (mod8set, flatset) # + Added parameters nsigma , minsignificance & detectextended # to omdetect using default values 2.0 , 3.0 anmd 'Y' respectively. # + Remove redundant ommag parmater wdxset # + Change implot parameter withsrclistset to withsrclisttab (SAS 5.4) # Version 2.27 - 30-Oct-2002 (DJF) # + OM Source rectification removed to a separate module # Version 2.24 - 2.26 - 23-Oct-2002 (DJF) # + Position recitification isn't working. Attempt to fix by # removing preselection from USNO. # Version 2.23 - 30-May-2002 (DJF) # + Added position rectification against usno as an intermediate product # for testing. # # OMMosaic 2.20 2.22 # Version 2.22 - 2002-12-13 (DJF) # + implot parameter changes. Merged plotfile/Device # Version 2.21 - 2002-12-11 (DJF) # + Change implot parameter withsrclistset to withsrclisttab (SAS 5.4) # # OMSrcRect [none] 1.09 # Version 1.09 - 4-Dec-2002 # + omatt ppsoswset parameter now optional so removed. # Version 1.03-1.08 - 4-Nov-2002 - 12-Nov-2002 (DJF) # + Added some info lines to help debug # + Debugging # Version 1.02 - 1-Nov-2002 (DJF) # + Amended evaluate rules. # Version 1.01 - 30-Oct-2002 (DJF) # + Removed perl debug statement. # Version 1.00 - 30-Oct-2002 (DJF) # + Initial version # # RGSEvents 3.09 3.14 # Version 3.14 - 11-Nov-2002 (DJF) # + Added writedss => N and updateexposure => N to flare background # creating evselect # Version 3.13 - 4-Nov-2002 (DJF) # + Added region X & Y axis to background timeseries creation to supress # an error message. # Version 3.12 - 31-Oct-2002 (DJF) # + Added exception call for background timeseries creation errors # Version 3.11 - 31-Oct-2002 (DJF) # + Added RGS flare background timeseries # Version 3.10 - 04-July-2002 (DJF) # + rgssources attstyle=mean changed to attstyle=median # # RGSProducts 1.18 1.26 # Version 1.26 - 26-July-2002 (DJF) # + Clear spectra list after each source. # Version 1.25 - 25-July-2002 (DJF) # + Turned rgs total source spectra from intermediate files to products. # Version 1.24 - 22-July-2002 (DJF) # + RGS response matrix and fluxed spectra removed. # The SAS tasks will not be sufficiently mature until the # next major SAS release. # + Fixes for total spectrum creation # Version 1.23 - 16-July-2002 (DJF) # + Fixed intermediate filename for new total spectrum # Version 1.22 - 09-July-2002 (DJF) # + Added production of total source spectra # Version 1.21 - 12-June-2002 (DJF) # + order is not a valid parameter for intermediate files # Version 1.20 - 12-June-2002 (DJF) # + Bug fix, rgsorder is not a valid parameter for intermediate files # Version 1.19 - 11-June-2002 (DJF) # + Added sas tasks rgsrmfgen and rgsfluxer # # SendDPSS 2.05 2.07 # Version 2.07 - 2002-06-28 (DH) # + Changed From: address to sscops # Version 2.06 - 2002-05-21 (DH) # + Change maxlikthresh param in dpsssrc from 50 to 0. # # SrcMerge 1.10 1.12 # Version 1.12 - 2002-07-02 (DJF) # + Changed srcmatch systerr from 4.0 to 2.5 # Version 1.11 - 2002-05-30 (DJF) # + Catalogue version copied into production pipeline. # See Version 1.10.2 - 1.10.7 ChangeLogs for further details # Version 1.10.7 - 2002-05-17 (DJF) # + Added evalcorr task # Version 1.10.6 - 2002-05-15 (DJF) # + Amended eposcorr maxoffset (was 7, now 10) and maxdist (was 20 now 15) # parameters # Version 1.10.5 - 2002-04-30 (DH) # + Add option to write out likelyhood image in eposcorr. # Version 1.10.4 - 2002-04-30 (DH) # + Specify input source lists as being of format FITS. # Version 1.10.3 - 2002-04-23 (DH) # + Don't use source lists in srcmatch if they have not been # background screened. # Version 1.10.2 - 2002-03-29 (DH) # + Add in call to eposcorr to correct positions of combined # source list. # Version 1.10.1 - 2002-03-28 (DH) # + Remove dependency on OMSourceCombine - Catalogue pipeline only. # # pnEvents 1.61 1.65 # Version 1.65 - 11-Nov-2002 (DJF) # + Updated evlistcomb columns to include OFFSETX # + Added DLIMAP to evlistcomb othertables option # Version 1.63 - 11-Nov-2002 (DJF) # + Updated backgroundrate (0.0001->0.0011) and hienergythresh (10.0->12.0) # in second call to badpixfind # Version 1.62 - 17-Oct-2002 (DJF) # + Moved OFFSETS from othertables to maintable option # Tasks # ----- # # # atthkgen 1.17.2 1.17.3 # Version 1.17.3 - 2002-05-24 (MJF) # - (src/atthkgen_mod.f90): corrected median determination # - closed SSC-SPR-2853: median values calculated incorrectly # # badpix 2.26.2 2.26.3 # Version 2.26.3 - 2002-07-23 (MJF) # - (DEPEND): needs `eptestdata-0.5' # - (DEPEND): added "sas" as required by new infrastructure (sas-1.302) # # eboxdetect 4.7.1 4.7.5 # Version 4.7.5 - 2002-12-16 GL # - correction to documentation # Version 4.7.4 - 2002-10-30 GL # (release track version) # - Same as 4.12, but uses param v1 # Version 4.12 - 2002-10-30 GL # (development track version) # - Fixed DEPEND file # - Renamed column SIGMA to LIKE # - Removed Warning: "CROTA2 missing" # - Closed SPRs: # +SSC_SCR-2966 Source buffer overflow # +SSC_SCR-3009 Source buffer overflow (uncomp timing mode) # Version 4.8 - 2002-05-24 GL # - Converted .par file to XML # Version 4.7.2 - 2002-05-16 HB # - Closed SSC-SPR-2836 wrong source counts formula in documentation # - Closed SSC-SPR-2862 (on eposcorr) inconsistent lii/bii,lii_corr/bii_corr # values: constant 'pi' set to double precision (also fixed in # emldetect) # # eexpmap 3.23.2 3.27.2 # Version 3.27.2 - 2002-11-19 # - release track version # - Same as v3.30, but uses param v1.x # Version 3.27.1 - 2002-11-18 # - release track version # - Same as v3.29, but uses param v1.x # Version 3.29 - 2002-11-15 GL # - Included proper treatment of flag selections of the input image. # - Default value for parameter badclean=0 # Version 3.28 - 2002-10-28 GL # - Same as 3.26 # Version 3.26 - 2002-09-10 GL # - Adapted to dsslib v4.0 # Version 3.23.6 - 2002-09-18 GL # - Same as 3.23.4 # Version 3.23.4 - 2002-09-18 GL # - ppstrack version # - Same as v3.25, but param 1.0 i/f # Version 3.25 - 2002-07-31 GL # - Enable reading of OFFSETS extension of event list. # - Avoid crashes when OFFSETnn extensions are empty. # - Closed SPRs: # + SSC-SPR-2877 EXPIDSTR keyword missing # + SSC-SPR-2880 ATT_SRC keyword missing # + SSC-SPR-2955 Parameter not documented # Version 3.24 - 2002-05-24 GL # - Converted .par file to XML # Version 3.23.3 (2002-05-22) HB # - To avoid excessive memory usage the task automatically switches # from fast to slow pixelization mode in the rare cases where a large # number of attitude historgram bins is required due to an unstable # attitude. In task version 4.21 an error was introduced which resulted # in exposure maps offset by about 1.5 arcmin in these cases. # Corrected in version 3.23.3 # Version 3.23.3 (2002-05-22) HB # - To avoid excessive memory usage the task automatically switches # from fast to slow pixelization mode in the rare cases where a large # number of attitude historgram bins is required due to an unstable # attitude. In task version 3.21 an error was introduced which resulted # in exposure maps offset by about 1.5 arcmin in these cases. # Corrected in version 3.23.3 # # emevents 6.5.3 6.5.4 # Version 6.5.4 - 2002-05-14 (JB) # - Remove reference to lccorr in doc (emevents_description.tex). # # emldetect 4.11.10 4.11.15 # Version 4.11.15 - 2002-09-20 GL # - release track version # - Updated documentation # Version 4.11.14 - 2002-09-18 GL # - ppstrack version # - same as v4.22, using param v1. # Version 4.22 - 2002-08-09 GL # - introducing parameter "fitnegative": # if set to "true", allow fitting of negative count rates. # Version 4.21 - 2002-08-09 GL # - Fudge likelihood function in order to avoid fits running away to very # negative count rates. # Version 4.20 - 2002-08-06 GL # - Remove countrate >= 0 limitation. # Version 4.19 - 2002-07-31 GL # - Fixed distribution # Version 4.18 - 2002-07-31 GL # - Fixed distribution # Version 4.17 - 2002-07-31 GL # - Limit count rates to >= 0 (as in versions to 4.14) . # If lower confidence limit of count rate is negative, # use upper 1 sigma confidence limit as count rate error. # This modification ensures proper error estimates for small count rates. # Version 4.16 - 2002-07-18 GL # - Modified likelihood computation in order to deal with negative # source counts. # Version 4.15 - 2002-07-11 GL # + Allow negative count rates in PSF fitting. # (fixes problem of large errors of small or zero count rates) # Version 4.14 - 2002-05-31 HB # - task now issues an error if WCS keywords of input files do not agree # Version 4.13 - 2002-05-24 GL # - Based on v4.11.13 # + Changed dimensions of array SIMA to 0:250, # prevents crashing for image binsize < 2 arcsec # + Adjust emldetect.par to param v2 # Version 4.11.13 - 2002-05-22 GL # - Removed test output # Version 4.11.12 - 2002-05-22 HB # - Closed SSC-SPR-2869 Several sources are not found at the right place # Error occured in versions from 4.11.8 # (Initialize XID band countrates to their proper values, # changed initialisation of unknown countrates to 100./exposure) # Version 4.11.11 - 2002-05-16 HB # - Closed SSC-SPR-2862 (on eposcorr) inconsistent lii/bii, # lii_corr/bii_corr corrrected by changing constant 'pi' to double # precision # # epevents 6.32 6.32.4 # Version 6.32.2 - 2002-11-10 (MJF) # - (src/epevents_mod.f90): ensured "OR" in FLAG column (as in 6.35) # - closed SSC-SPR-2997: CLOSE_TO_BRIGHTPIX, INVALID_PATTER flag overwrite # CLOSE_TO_CCD_WINDOW flag # Version 6.32.1 - 2002-11-09 (MJF) # - (src/epevents_mod.f90): option for alternative out-of-time event # handling (as in 6.34) # - (config/epevents.par): new parameter "withctisrcpos" (default: N) # - (doc/epevents_description.tex): see above # # epframes 8.46.5 8.46.11 # Version 8.46.11 - 2002-10-09 (MJF) # - (src/epframes_mod.f90): added 0045_0120300101_PNS005 to black-list # Version 8.46.10 - 2002-10-03 (MJF) # - (src/epframes_mod.f90): removed CATEGORY keyword from event list # - (doc/epchain_description.tex): changed \subsection{} to # \taskparametersnote{} in the parameters section, however, the new # sub-parts now do not have an automatic number anymore due to # infrastructure definition # - closed SPRs: # - SSC-SPR-2989: please remove CATEGORY keyword # - SSC-SPR-2962: HTML parameter documentation broken # Version 8.46.9 - 2002-08-22 (MJF) # - (src/epframes_mod.f90): extract DLI rate also from PMH file as this # quantity is not affected by counting mode (unlike the AUX2 derived # values) # Version 8.46.8 - 2002-08-07 (MJF) # - (src/epframes_mod.f90): initialize variables at run time instead of # during variable declaration so that metatask usage does not fail # [SSC-SPR-2819] # - (src/epframes_mod.f90): enable analysis of DLI files (preliminary # version) # - (src/epframes_mod.f90): add warning in case of "MIP CORREC.1" # - (doc/epframes_description.tex): as above # - closed SSC-SPR-2819: Implicitly saved variables cause epproc to fail # Version 8.46.7 - 2002-07-26 (MJF) # - (src/epframes_mod.f90): increased "late-time-reset" parameter from 16 to # 100 for TI and BU modes to solve a problem with 0411_0153750301_PNS001 # (CCD 4). Was accidentally not included in previous version. # - closed SPRs: # - SSC-SPR-2776: ARRFRACEXP out of range [0044_0119710201_PNS001] # - SSC-SPR-2816: Too many warnings in uncritical cases # Version 8.46.6 - 2002-06-03 (MJF) # - (src/epframes_mod.f90): adjusted the internal "late-time-reset" parameter # from 1 to 2 for FF and eFF modes [SSC-SPR-2815], this fixes also problems # that occured for 0032_0117500201_PNS011 (CCD 10) and # 0042_0119100201_PNU003 (CCDs 4-9), increased this parameter from 16 to # 100 for TI and BU modes to solve a similar problem with # 0411_0153750301_PNS001 (CCD 4). No changes for SW and LW modes (no # problems known). # - closed SSC-SPR-2815: Event time computation fails for 2 ODFs # [0193_9019300003_PNS003, 0224_0093620801_PNU003] # # eposcorr [none] 3.4.2 # Version 3.4.2 (2002-05-15) HB # - New task parameters added: # rawxsyserr,r,h,1.5,,,"systematic error of input X-ray positions" # minxsyserr,r,h,0.2,,,"irreducible systematic error of X-ray positions" # maxsig,r,h,5.0,,,"sigma cutoff for X-ray/optical matches" # usemaxsig,b,h,yes,,,"use sigma cutoff limit" # - maxposnerr internally multiplied by sqrt(0.5) to achieve consitency # with RADEC_ERR values # - Closed SSC-SPR-2863 inproperly fixed SPR 2830 corrected # Version 3.6 (2002-04-20) HB # - Closed SSC-SPR-2830 Number of matches does not account for multiple rows # Version 3.5 (2000-01-28) HB # - Error in parameter file corrected # Version 3.4 (2001-10-17) HB # - error in the test harness corrected # Version 3.3 (2001-10-13) HB # - units of RA, DEC, and error columns now read from source table # - position error column no longer required # - optional output of table containing matched sources with distances and # likelihood contributions for each matched pair # - RA, DEC offsets and rotation angle can optionally be specified as # input parameters instead of being determined by the programme # - column names for R and B magnitues now specified by input parameter # Version 3.2 (2001-08-13) HB # - Closed SPRs: # + SSC-SPR-2486 Fails to compile with NAG F95 4.1 # + SSC-SPR-2357 Allow correlating X-ray sources with one another # + SSC-SPR-2316 SCR 56task puts too many restrictions on input file # Version 3.1.1 (2001-06-01) HB # - Closed SSC-SPR-2414 broken link in HTML doc # Version 3.1 (D.M., September 22., 2000) # + Possibility to reduce positional error by only considering # strong sources with low positional error: Parameter maxposnerr # Version 3.0 (JV, Juli 21, 2000) # + Possibility to search for rotational errors added (but is still slow) # + Parameters added/changed # Version 2.0.1 (JV, June 16, 2000) # + missing info file added # + changed the internal error representation as there was a discrepancy # between documentation and code. # + as a consequence the test harness had to be changed as well # Version 2.0 (JV, June 2000) # - Changed the names of keywords added by eposcorr to the source list data # set. # - Added some additional keywords. # - Parameters added in order to select R and B magnitudes from the input # optical set. # Version 1.1 # - The task has been updated to work properly with the latest summary # srclists. See SSC-SPR-1272, 1273, 1274 # - Added a keyword describing the approximate error in the position # correction applied. # Version 1.0 # - This version is similar to v 0.1, but I have changed the test files # and removed the *.cc files. See SSC-SPR-1253, SSC-SPR-1248, # SSC-SPR-1129, SSC-SPR-1117. # - Open SPRs: SSC-SPR-1253 - 1234 # # esensmap 3.5 3.5.2 # Version 3.5.2 - 2002-09-19 GL # - fixed distribution # Version 3.5.1 - 2002-09-18 GL # - ppstrack version # - same as v3.10, using param v1. # Version 3.10 - 2002-07-31 GL # - Closed SPRs: # SSC-SPR-2878 EXPIDSTR keyword missing # SSC-SPR-2881 ATT_SRC keyword missing # Version 3.9 - 2002-06-05 # - Fixed a bug in v 3.8 that lead to error condition # "Inconsistent WCS keywords" for valid images. # Version 3.8 - 2002-05-31 # - Closed SSC-SPR-1026 Coherence of input images # Version 3.7 - 2002-05-28 # - Updated DEPEND # Version 3.6 - 2002-05-27 # - Converted .par file to XML # # esplinemap 3.2.2 3.2.4 # Version 3.2.4 - 2002-11-01 GL # - (PPS / RT version) # - Same as v3.4, but uses param v1 # Version 3.4 - 2002-11-01 GL # - Adapted to column name change in eboxdetect 4.11 # Version 3.2.3 (2002-05-24) GL # - Prevent crashes due to access of RAWCOLS with chipix=0 # # evalcorr [none] 0.2.2 # Version 0.22 - 2002-07-30 # - Changed test harness to use 'cmp' to compare output. # - Fixed Test 13 # Version 0.21 - 2002-05-31 # - Updated dependencies (SAS 5.3.3) # Version 0.2 - 2002-05-29 # - Version number changed for upload to SAS for SAS 5.3.3. # Version 0.1.1 - 2002-05-20 # - Changed warnings to errors. If they occur there is something # amiss that you really need to fix. # Version 0.1 - 2002-05-15 # - original version # # evselect 3.47.2 3.47.8 # Version 3.47.8 - 2002-11-18 (DH) # + Replace E_MIN, E_MAX, E_UNITS keywords in light curves with CHANMIN, # CHANMAX CHANTYPE keywords, as these better convey wanted filtering # information. # Version 3.47.7 - 2002-10-15 (DH) # + Update DEPEND file for new dsslib. # Version 3.47.6 - 2002-09-24 (DH) # + No change. # Version 3.47.5 - 2002-09-23 (DH) # + Take cout debug print statements (sigh!). # Version 3.47.4 - 2002-09-23 (DH) # + Fix problem with merging of GTIs when updating exposure info. GTIs must # be sorted before they are merged. Closes SSC-SPR-2985. # + Fix algorithm for writing LTV/M keywords. Closes SSC-SPR-2967. # + Write new set of WCS keywords of type 'L'. These are for the physical # coordinate system, and provide the same info as the LTV/M keywords, # which will soon be deprecated. # Version 3.47.3 - 2002-05-16 (DH) # + Documentation updates. Closes SPR 2825. # # gtimerge 1.3 1.3.1 # Version 1.3.1 - 2002-06-24 (GV) # + Add set -e to gtimergetest so that it does not hang when # evselect and/or one of the ftools hang. # # implot 1.7 2.5.2 # Version 2.5.2 - 2002-12-13 (IMS SSC/LUX) # - Changed variable pgplotDevice from character(20) to (255). # Version 2.5.1 - 2002-12-12 (IMS SSC/LUX) # - Modified test harness slightly in an attempt to fix SPR 3042. # - Updated documentation (also fixes SPR 3021). # - Fixed SPR 3022 by improving the handling of NaN values. # - Changed --labelstyle default from 'expr' to 'none'. This was an # irritating default. # Version 2.5 - 2002-10-18 (IMS SSC/LUX) # - Added parameters --imagestyle, --contourstyle, --ncontours and # --contourseparation to allow contour plots of FITS images. # - Changed --*srclistset to --*srclisttab. # - Went back to 2.0. # - SPR 2873 closed. # Version 2.0 - 2002-05-17 (IMS SSC/LUX) # - Heaps of new functionality added. Was implot_b but renamed as implot # for soc ruminations. None of the changes as yet accepted by ccb. # # obssumm 4.4.5 4.4.7 # Version 4.4.7 29-Oct-2002 (DJF) # - Fixed to handle suumary file months of 1-12 as nternally required 0-11 # - Changed 'noclobber not set' from a warning to a message # Version 4.4.7 23-Oct-2002 (DJF) # - Changed header Obs Length value and string to Scheduled length # (= Scheduled Start - Stop) # - Changes 'Obs Length' string in Proposal section to 'Prop Duration' # - Changed DISTRIBUTION to ssc # # odfingest 3.7.5 3.9 # Version 3.9 - 2002-05-17 (GV) # + (OdfObject.cc) make the messages about missing CONFIGURATIOn or # PROPOSAL record more explicit. # Version 3.8 - 2002-04-10 (GV) # + (OdfObject.cc::proposal_summary_rec) Change how the PROPOSAL # record is read from the original SUM.ASC file. This should make it # more robust against those cases when the line of text containing # the word PROPOSAL contains characters other than blank. SOC-SPR-2286. # + A missing CONFIGURATION record in the SUM.ASC is no longer a # warning, only a message. # # omatt 2.27 2.30.1 # Version 2.30.1 - 2002-12-04 (CB) # - Configuration file ammended. # Version 2.30 - 2002-12-02 (CB) # - Parameter file ammended- added boolean, optional, parameter # "rotateimage" - default value "true" means create rotated image. # Parameter "ppsoswset" changed to an optional one. Parameter # "catdir" removed. # - (src/) Code ammended to implement parameter changes. # Version 2.29 - 2002-10-18 (CB) # - Uploaded using old param file into release track # Version 2.28 - 2002-06-10 (CB) # - Modified config and depend file for param version 2.0./ # Version 2.27.4 - 2002-07-02 (CB) # +(src/) "Rmag" changed to "RMAG"and "Bmag" to "BMAG", (SPR 2928) # Problem with catalogue file name fixed (SPR 2923) # Version 2.27.3 - 2002-06-18 (CB) # - String to hold the catalogue file name enlarged (fixes SPR 2907) # Version 2.27.2 - 2002-06-14 (CB) # - Optional parameter "catdir" changed to "catfile"- program modified # to pick up the name of the star-catalogue from this optional parameter. # Version 2.27.1 - 2002-05-29 (CB) # - Documentation updated and minor improvement to astrometry # correction made. # # omcomb 2.2 2.2.1 # Version 2.2.1 - 29/05/2002 (CB) # - Documentation updated # # omcosflag 1.21.3 1.21.6 # Version 1.21.6 2002-12-05 # - Corrected ZERODRIFT warning message # Version 1.21.5 2002-12-05 (CB) # - Changed ZERODRIFT warning to message (SPR 3036) # Version 1.21.4 2002-05-28 (CB/SRR) # - updated documentation # # omdetect 3.5.5 4.1.8 # Version 4.1.8 - 2002-12-18 (CB) # - Documentation correction. # Version 4.1.7 - 2002-12-03 (CB) # - Test harness ammended to fix test failure. # Version 4.1.6 - 2002-12-03 (CB) # - Ammended program to fix SPRs 3039 & 3035. # Version 4.1.5 - 2002-11-01 (CB) # - Ammended program to fix SPRs 3018 & 3019. # Version 4.1.4 - 2002-11-01 (CB) # - Blundered in making minor code modification.. # Version 4.1.3 - 2002-11-01 (CB) # - Minor ammendment to code that validates extended source. # Version 4.1.2 - 2002-10-29 (CB) # - Test harness modified to cure failure. # Version 4.1.1 - 2002-10-24 (CB) # + (src/omdetectdetection_mod.f90) Modified to deal better with # sources surrounded by strong mod-8 patterns. # Version 4.1 - 2002-10-15 (CB) # + (src/omdetectphotometry_mod.f90) modified to do extended # photometry more accurately. # + New columns in source-list added. # + Source detection algorithm improved. Program tidied up. # Version 3.5.7 - 2002-07-11 (CB) # - Code tidied up. Number of connected pixels in a source # limited to maximum of 10000 to prevent program crashing # (fixes SPR 2851) # - New source detection routine (in module sourcedetection) # added to detect point sources that the original source # detection code misses in extended source regions. Memory # requirements reduced. Two minor bugs fixed. # Version 3.5.6 2002-05-30 (CB) # - Documentation updated # # omdrifthist 1.21.3 1.21.4 # Version 1.21.4 2002-05-28 (CB/SRR) # - Documentation updated. # # omfastflat 1.12.1 1.12.2 # Version 1.12.2 30/05/2002 (VNY) # (+doc/omfastflat_description.tex) documentation updated. # # omfastshift 1.21.3 1.21.4 # Version 1.21.4: 30th of May, 2002 (VNY) # (+src/omfastshift_mod.f90, +doc/omfastshift_description.tex) # documentation updated. # # omflatfield 2.2.2 2.2.5 # Version 2.2.5 - 2002-12-05 (CB) # + (src/) ZERODRIFT message corrected (SPR 3037) # Version 2.2.4 - 2002-12-05 (CB) # + (src/) ZERODRIFT warning message changed to message (SPR 3037) # Version 2.2.3 - 2002-05-29 (CB/SRR) # + Documentation updated. # # omflatgen 1.8 1.8.1 # Version 1.8.1 - 2002-05-29 (CB/SRR) # - Documentation updated # # omlcbuild 1.15.5 1.15.10 # Version 1.15.10 - 2002-10-29 (VNY) # + /scr/omlcbuild_mod.f90. Protection against the absence of # the COINCLOSS_CORR column is introduced (SPR-3007) # Version 1.15.9 - 2002-10-25 (VNY) # + /src/omlcbuild_mod.f90. Corrected a bug, which was introduced # at the end of September and which resulted in the impossibility # to find the CORR_RATE_ERR column in the source list file # (SSC-SPR-3004) # Version 1.15.8 - 2002-10-16 (VNY) # + Updated to be able to work with the modified SRCLIST-file # format (the modified omdetect task doesn't produce the # MAG-column; thus, omlcbuild picks up this column only if # it exists). # + Calculation of averaged instrumental magnitude of the source # has been improved: now the count rates are averaged before # the magnitude calculation. # + Comments on the columns in the RATE table are added. # + The Source List Table is rearraged in order to make it # similar to that produced by the OMICHAIN task. # + Additional checks to improve robustness of the task has been # added: the presence of the CORR_BACKGROUND_RATE column is checked # before adding new columns (the file SWSRCLI), thus, an error # message is avoided in case of the absence of this column. # Version 1.15.7 29.05.2002 (VNY) # - RA and DEC keywords have been replaced with RA_OBJ and DEC_OBJ in # order to make it easier to run BARYCEN on the light curve data. The # fatal error message about the wrong table length in the input data file # is replaced with a worning. Documentation is updated. # Version 1.15.6 09.05.2002 (VNY) # - A small shift to the psf-map is applied when calculating the scaling # areas and coefficients. This makes the psf-map coinsiding with the # CCD-grid. The scaling factors are calculated more rogorousely. # - A bug, which restricted the timebinsize parameter, has been fixed # (SSC-SPR-2864) # # ommag 2.2.5 3.1.2 # Version 3.1.2 - 2002-10-30 (CB) # - Source list file in test harness updated to fix test failure. # Version 3.1.1 - 2002-10-22 (CB) # - Test harness ammended to fix SPR 3002 # Version 3.1 - 2002-10-17 (CB) # - Uploaded for the release track # Version 3.0 - 2002-10-14 (CB) # - Modified to use the source-list file produced by omdetect version # 4.0- Does not now do the source coincidence-loss corrections, but # does the source-rate correction (where necessary) from 12 to 35 # pixels and the dead-fraction correction. Adds a new column for the # former correction. # Version 2.4 - 2002-08-16 (CB) # - Since omdetect has been modified to do the coincidence-loss # correction ommag has been modified not to do this one. # Version 2.3 - 2002-05-15 (CB) # - Added the columns CORR-RATE, CORR-RATE-ERR,COINC-CORR, # PSF1-CORR, PSF2-CORR, CORR-BACKGROUNDRATES, and the keywords # FRAMTIME and DEADFRAC # # ommodmap 2.4 2.4.1 # Version 2.4.1 - 2002-05-29 (CB/SRR) # +(doc/ommodmap_description.tex) minor correction and improvement # (SPR 2697). # # ommosaic 1.5.3 1.9 # Version 1.9 - 2002-10-17 (CB) # - Uploaded into release track # Version 1.8 - 2002-10-07 (CB) # - Further small modification for SPR 2991 # Version 1.7 - 2002-10-03 (CB) # - Pixels in output image around mosaiced boundaries with NULL values # replaced with average value of suurounding pixels (fixes SPR 2991) # Version 1.6 - 2002-09-12 (VNY) # - DEPEND file has been updated # Version 1.5.7 - 2002-06-14 - (CB) # - oal added to Makefile. # Version 1.5.6 - 2002-06-14 - (CB) # - Makefile ammended. # Version 1.5.5 - 2002-05-30 - (CB) # +(src/ommosaic_mod.f90) Modified to add ATT_SRC keyword (fixes SPR 2885). # Version 1.5.4 - 2002-05-29 - (CB) # - Documentation corrected # # omprep 2.25.3 2.29.2 # Version 2.29.2 - 2002-12-12 (CB) # - Documentation ammended (fixes SPR 3055) # Version 2.29.1 - 2002-12-12 (CB) # - Fixes a bug that has come to light in Leicester pipeline testing. # Version 2.29 - 2002-10-17 (CB) # - Code tidied up # Version 2.28 - 2002-10-08 (CB) # +(src/omprep_mod.f90) - Modified to store # ccd frametime & dead fraction in image header # for omdetect version 4.0 # Version 2.27 - 2002-10-03 (CB) # - Modified DEPEND file.. # Version 2.26 - 2002-06-10 (CB) # - Modified config and depend file for pa # Version 2.25.5 - 2002-07-03 (CB/SRR) # - Provided a new modeset option (3) to allow # separate processing of OM tracking history files - fixes SPR 2840. # Version 2.25.4 - 2002-05-28 (CB/SRR) # - Documentation updated. # # omregion 2.6.3 2.6.5 # Version 2.6.5 - 30/05/2002 (VNY) # - documentation updated # Version 2.6.4 - 09/05/2002 (VNY) # - ChangeLog-file corrected # # omsrclistcomb 1.21.8 1.24 # Version 1.24 - 2002-10-17 (CB) # - Uploaded into release track # Version 1.23 - 2002-10-03 (CB) # + (src/omsrclistcomb_mod.f90) - Modified to only combine # sources with the same extension flag number(fixes SPR 2984). # Version 1.22 - 2002-09-12 (VNY) # - DEPEND-file updated # Version 1.21.9 : - 2002-05-30 (CB) # - Documentation updated. # # omthconv 1.27.2 1.27.7 # Version 1.27.7 - 2002-11-04 (CB) # - Makefile in config directory ammended to cure build failure # Version 1.27.6 - 2002-11-01 (CB) # - DEPEND file ammended to cure build failure # Version 1.27.5 - 2002-10-31 (CB) # - Invalid layout file deleted to cure build failure # Version 1.27.4 - 2002-05-28 (CB) # +(src/omthconv_mod.f90) Added attributes EXPIDTR and ATT_SRC # (SPRS 2879 & 2880) # Version 1.27.3 - 2002-05-28 (CB/SRR) # + Documentation updated. # # ppssumm 2.3.6 2.3.7 # Version 2.3.7 - 08-07-2002 # - Corrected DTD reference # # rgsframes 3.13.2 3.13.3 # Version 3.13.3 - 2002-12-03 (UL) # + brought in line with cal-3.152.1 # (observationStartDate->exposureStartDate) # # rgsimplot 1.11.7 1.11.8 # Version 1.11.8 05-12-2002 (CB) # - RA string ammended to fix SPR 3025. # # rgsspecplot 2.16.7 2.16.13 # Version 2.16.13 - 2002-12-12 (NW) # - Changed the way of embedding figures to \epsfig, so that the # figures appear in the electronic documentation. # Version 2.16.12 - 2002-09-23 (NW) # - This version is the same as 2.18.1, except that it doesn't have # the changes for the new version of param. This is to close # SPR-2982 (Empty spectra are negative (again)), where although the # task works fine in the development track, this version cannot be # used in the next pipeline. The documentation has also been # updated. # Version 2.18.1 - 2002-07-25 (NW) # - Only uses poissonian errors if there is no STAT_ERR column # Version 2.18 - 2002-07-25 (NW) # - Update the DEPEND file and now includes a dependence on sas. # Version 2.17.2 - 2002-07-25 (NW) # - Removed the dependency on the STAT_ERR column, now use the square # root of the counts as the error, to close the SPR 2949, `Task # unable to plot total spectrum'. Revised documentation. # Version 2.17.1 - 2002-07-01 (NW) # - The way that the binned up data is presented has been changed. # The errors are now the square root of the binned up counts, which # solves the problem of `plots from empty fields are negative on # average', SSC-SPR-2898. This also solves the problem SSC-SPR-2903 # `Wrong wavelength and energy scales'. The x-axis has also been # extended to show the whole of the first and last bin # Version 2.17 - 2002-06-03 (NW) # - This version contains the changes for the new version of param. # Version 2.16.11 - 2002-06-03 (NW) # - This version does not contain the changes for the new version of # param, only the new documentation. # Version 2.16.10 - 2002-06-03 (NW) # - Made the necessary changes for the new version of param and # updated the documentation to explain the method used for the # rebinning. # Version 2.16.9 - 2002-05-16 (NW) # - Extended the y-scale for the case of a spectral plot which has # maximum counts less than the maximum error, so that the error # values (which are always positive) can be viewed. # Version 2.16.8 - 2002-05-09 (NW) # - The data is now plotted as a histogram, as requested in SPR 2860 # (histogram-style please). Documentation has been updated. # # rgsspectrum 1.4.1 1.4.2 # Version 1.4.2 - 2002-05-17 (JDR) # - replaced output NULL values with zero (XSPEC on DEC Alpha chokes on NULL) # # srcmatch 3.10.4 3.10.8 # Version 3.10.8 - 2002-09-19 (GL) # - Fixed bug that crashed test harness. # Version 3.10.7 - 2002-09-18 (GL) # - ppstrack version # - same as v3.12, but using param v1.x # Version 3.12 - 2002-09-18 (GL) # - Closed SPRs: # SSC-SPR-2892 More info wanted in srcmatch output # SSC-SPR-2902 Exposure values wanted # SSC-SPR-2882 ATT_SRC keyword missing # - New keywords: DATAMODE, FILT_PN, FILT_M1, FILT_M2, EXPOS_PN, EXPOS_M1, # EXPOS_M2, ATT_SRC, SUBM_PN, SUBM_M1, SUBM_M2 # - New columns: nn_b_FLUX, ERR_nn_b_FLUX (nn=[PN,M1,M2]; # b=[1,2,3,4,5,TOT,XID] ) # Version 3.11 - 2002-05-27 (GL) # - Converted .par file to XML # Version 3.10.6 - 2002-05-17 (GL) # - Fixed bug in writing flag columns # - Fixed test harness # Version 3.10.5 - 2002-05-15 (GL) # - New columns: # pn_val_flag # pn_ver_flag # pn_ver_comm # m1_val_flag # m1_ver_flag # m1_ver_comm # m2_val_flag # m2_ver_flag # m2_ver_comm # - Closed SSC-SPR-2823: Misleading instrument specific keywords # (set INSTRUME = EPIC, removed DATAMODE, FILTER, and EXPOSURE) # # Libraries # --------- # # cal 3.138.2 3.152.2 # Version 3.152 - 2002-11-20 (UL) # + closed SPR 2303: CAL_psfValidityRanges with ACCURACY_HIGH # + fixed problem with CAL_pnAdditionalGainCorrect() in C++/f90 layer # + fixed problem with missing virtual declaration in EnergyCorrector.h # + implemented ALGOID=1 of EPN long-term CTE model (time-dependence modelled # as 3. order polynomial; all parameters mode dependent); goes with # structural change in EPN_CTI CCF; all changes fully backward compatible # + implemented access to mode-dependent EMOS?_REDIST CCF with new MODE_ID # column; changes backward compatible # Version 3.151 - 2002-08-23 (UL) # + frame time parameter of ModeParam atom now obtained from TIMECORR CCF # + additional parameter passed to CTE code in calpnalgo # Version 3.150 - 2002-08-19 (UL) # + more transparent fixes to enhance C++ standard compliance # Version 3.149 - 2002-08-16 (UL) # + added various f90 routines to retrieve pattern fraction data from CCF # + fixed wrong name of CAL_psfEnboxedEnergy() in c++/f90 I/F layer # + gcc-2.96/3.1 portability fixes # Version 3.148 - 2002-08-02 (UL) # + fixed problem in CAL_releaseMemory I/F (3D vectors could not be released) # Version 3.147 - 2002-07-31 (UL) # + implemented ALGOID=2 MOS CTI correction # Version 3.146 - 2002-07-26 (UL) # + read additional gain/CTI parameters from CCF and pass to CTI/gain # correction codes in calpnalgo>=2.39 [requires EPN_CTI_>=0009.CCF] # + implemented new routines # CAL_pnAdditionalGainCtiCorrect # CAL_pnGainTimingCorrect # CAL_pnGainBurstCorrect # these replace corresponding ones in calpnalgo which become obsolete; # needed parameters are likewise read from EPN_CTI_>=0009.CCF; updated # doc w.r.t to new routines # + closed SPR 2246: Useof CCDID from EMOSn_QUANTUMEFF in calview # [QE Calviewable was not sensitive to theta/phi values in state] # Version 3.145 - 2002-07-22 (JBa) # + changes in source files in order to comply with ANSI C++ # Version 3.144.1 - 2002-07-01 (UL) # + fixed minor problem in one test harness related to 3.144 changes # Version 3.144 - 2002-06-28 (UL) # + replaced all occurences of 'strstream' with standard-conformant # 'stringstream' # Version 3.143 - 2002-06-26 (UL) # + bug fix in misalignmentFigureDistribution() related to recent addition # of ICO argument # + CAMCOORD1->CHIPCOORD conversion will now yield CCD with higest elevation # in focal plane (only relevant for EMOS for overlapping chip areas) # (closes SPR 2326) # Version 3.142 - 2002-06-14 (UL+JDR) # + changes to alignment of first moment in dispersion figure distribution # (relevant for rgsrmfgen only) # + added new BackgroundDataServer atom with support for RGS HTR mode # + added inChannelOffset argument to # GratingDataServer::misalignmentFigureDistribution() # Version 3.141 - 2002-06-12 (UL) # + fixed bug in calculation of errors of converted OM count rates # + fixed minor problem caused by not capturing invalid atan2() arguments # in CAMCOORD2->TELCOORD conversion # + added CAL_getMiscallaneousDataCcd() # Version 3.140 - 2002-05-24 (GV) # + Merge changes made on the RT at 3.138.{3,4} # + (Ccf.cc) remove some print statements that had been left in the # constructor of CCfAccessLog. Modify operator<<() for # CcfAccessLog, so that it also re-issues warnings about expired # CCF constituents. This operator is used in taskmain before the # task is exited, so these warnings are again prominently shown. Is # this an example of a 'critical' warning? ;-) # + (Ccf.{cc,h}) Change the class CcfAccessLog so that it knows # about possible expired CCF constituents. In Ccf.cc rename the # FileLocator fileLocator to myfileLocator to avoid a name clash # with extern fileLocator (from SasFileLocator.h). + Add the # configuration file ccf.conf to the config subdirectory. + Write # test harness for the above: testccfconf # Version 3.139 - 2002-04-18 (UL) # + *-vs-theta calview plots go out to theta=1200" now # + brought in line with utils-1.88 # + some code aesthetics # Version 3.138.4 - 2002-05-24 (GV) # + (Ccf.cc) remove some print statements that had been left in the # constructor of CCfAccessLog. Modify operator<<() for CcfAccessLog, # so that it also re-issues warnings about expired CCF # constituents. This operator is used in taskmain before the task is # exited, so these warnings are again prominently shown. Is this an # example of a 'critical' warning? ;-) # Version 3.138.3 - 2002-05-23 (GV) # + (Ccf.{cc,h}) Change the class CcfAccessLog so that it knows # about possible expired CCF constituents. In Ccf.cc rename the # FileLocator fileLocator to myfileLocator to avoid a name clash # with extern fileLocator (from SasFileLocator.h). # + Add the configuration file ccf.conf to the config subdirectory. # + Write test harness for the above: testccfconf # # calmosalgo 2.7.1 2.7.2 # Version 2.7.2 - 2002-12-04 (rds) # + (src/rmfrow.f) Bought in line with current LUX code # # caloalutils 1.66 1.71 # Version 1.71 - 2002-06-28 (UL) # + forgot one hidden 'strstream' in 1.70 # Version 1.70 - 2002-06-28 (UL) # + replaced all occurences of 'strstream' with the standard-conformant # 'stringstream' # Version 1.69 - 2002-06-18 (UL) # + added CalOalUtility::mem_fun_bin_op() # Version 1.68 - 2002-06-03 (UL) # + a few minor changes in view of selectlib-4.51 # Version 1.67 - 2002-05-23 (UL) # + fixed minor problem with include file in Celestial.h # + few additions to CartesianVector class in view of selectlib-4.48 changes # # calpnalgo 2.36 2.43.1 # Version 2.43.1 - 2002-12-05 (RDS) # + (src/rmf/pem_par.f): new redistribution code, direct from FH # Version 2.43 - 2002-10-30 (MJF) # + (src/ctigain/evcr03.f): added switch to decide which SW/LW CTI correction # function should be taken depending on CCF contents (backward # compatibility) # Version 2.42 - 2002-10-29 (MJF) # + (src/ctigain/evcr03.f): new SW/LW low-energy correction function # (unchanged in case of EPN_CTI_0009.CCF, extra term used with # EPN_CTI_0010.CCF) # Version 2.41 - 2002-09-11 (MJF) # + (src/ctigain/evcr03.f): changed type from SINGLE to DOUBLE precision # for time related variables (DT, TF, TY) # + (src/ctigain/ccd_par_descr.f): changed type from SINGLE to DOUBLE # precision for time related variables (RFP, RPRF) # Version 2.40 - 2002-08-23 (UL) # + evcr03InitCteParam() receives now additional parameter from CAL # (parameter name is 't_par'; only applicable in timing mode; read from # TIMECORR CCF) # Version 2.39 - 2002-07-18 (UL) # + changes in src/ctigain/evcr03.f: evcr03InitCteParam() receives now # additional parameters from the CAL (read from the CCF) and places # those in common blocks (ccd_par_decr.f) # + CAL/calpnalgo interface in interface/CalPnAlgo.h updated accordingly # + routines in sas_epn_gaincticorrect_mod.f90 have been rewritten in C++ # and moved to the CAL proper # Version 2.38 - 2002-07-10 (MJF) # + (DEPEND): added "sas" as required by new infrastructure (sas-1.302) # Version 2.37 - 2002-05-08 (MJF) # + (doc/calpnalgo_description.tex): removed parameter part as there is # no parameter interface and dependency on "param" can be removed # + (DEPEND): removed "param" as not needed anymore due to change in doc, # therefore this version can be used in the RT as well as in the DT # Version 2.36.1 - 2002-09-16 (MJF) # + (src/ctigain/evcr03.f): changed type from SINGLE to DOUBLE precision # for time related variables (DT, TF, TY) # + (src/ctigain/ccd_par_descr.f): changed type from SINGLE to DOUBLE # precision for time related variables (RFP, RPRF) # + closed SSC-SPR-2983: precursor handling in TI mode should use DOUBLE # PRECISION # # dal 1.154.3 1.159.2 # Version 1.159.2 - 2002-12-10 (GV) # + (doc/reference/examples/(insert|delete)rows.f90) These tests # accessed data after the pointers had been released. They failed # only on jupiter with a hard error. Fixed. # Version 1.159.1 - 2002-11-05 (GV) # + DEPEND adjusted for release track requirements. # + (fitstablecheck.cc) adjust header inclusion to adapt to release # track requirements. # Version 1.159 - 2002-11-04 (GV) # + (FitsReaderWriter.cc:readTableInfo) make the buffer holding a # long string keyword value larger to avoid segfault as in # SOC-SPR-2358. # Version 1.158 - 2002-09-09 (GV) # + (FitsReaderWriter.cc) Get rid of an assert that cause the seg # fault described in SOC-SPR-1883. # + (FitsReaderWriter.cc) Ignore reserved keywords out of context # instead of terminating with an error. (SOC-SPR-2141, SOC-SPR-2338) # + (DalTable.cc) It is now impossible to add a table with name # PRIMARY, as this name is reserved for the primary image # (SOC-SPR-2311). # Version 1.157 - 2002-09-06 (GV) # + The copyRows() implementation for variable length vector columns # was not always doing the right thing. It now works # (SOC-SPR-2343). Also, when asked to make a copy so that from == # to, do nothing instead of uselessly copying. Test harness spr2343 # added. # Version 1.156 - 2002-09-01 (GV) # + Reorganize directories, remove dead code, make tests run one at # a time. No functional changes. # Version 1.155 - 2002-06-27 (JBa) # + Preparation for GCC 3.1 # + Added virtual to otherwise dangerous destructors # # daltools 1.0 1.0.3 # Version 1.0.3 - 2002-11-11 (GV) # + (MemFitsReaderWriterX.cc) introduce local function # my_fits_read_keyword to wrap around the cfitsio equivalent and # remove the single quotes that cfitsio leaves around the value of a # string keyword. This fixes SOC-SPR-2364. # Version 1.0.2 - 2002-11-04 (GV) # + (MemFitsReaderWriterX.cc::addTable) it always believed that the # keyword HDUNAME had been found. Now makes a better # check. Added appropriate test harness. SOC-SPR-2356. # Version 1.0.1 - 2002-05-24 (GV) # + Make dsrm faster as per DAH's suggestion. # # datautils 1.2 1.8 # Version 1.8 - 2002-11-06 (RDS) # + Renamed V1.7 for release track # Version 1.7 - 2002-09-27 (RDS) # + (src/ImagePixelIterator.cc/h) Added extra constructor to cope # with inverted (X,Y) images. # Version 1.6 - 2002-09-17 (GV) # + GenericOperations.h: make the C macro legal under gcc-3.x and 2.96. # + ConvertableData.cc: use sstream, remove ends. # Version 1.5 - 2002-09-12 (RDS) # + (src/WCSConvertor.cc/h) added methods physicalRefPixel, linearCoords # + (src/ImagePixelIterator.cc/h) new routine to iterate without # converting to RA/DEC # Version 1.4 - 2002-08-07 (RDS) # + (src/ArrayPixelIterator.cc/h) added methods setIndex, ybins # Version 1.3.1 - 2002-07-08 (RDS) # + Removed stringutils.h from header # Version 1.3 - 2002-07-08 (RDS) # + Upgraded to param 2.0 and included stringutils.h in # ConvertableData.cc # # dsslib 3.16.5 4.0.2 # Version 4.0.2 - 2002-11-22 # + Fix bug in reading in bit filters from a fits file. Closes # SSC-SPR-3029. # Version 4.0.1 - 2002-10-15 # + Downgrade DEPEND file to work with release track. # Version 4.0 - 2002-08-08 (DH) # + Change f90 interface for dssRanges function to avoid name clash # and make the interface more convenient. Closes SSC-SPR-2156. # + Add support for parsing and ingesting of region filters which # specify only the region file. Closes SSC-SPR-2929. # + Fix bug in the operator&() method of the Range class, which # was not properly considering Unbounded ranges in some cases. # Also properly adjust max value for Ranges when changing types. # Closes SSC-SPR-2954. # Version 3.17 - 2002-07-23 (GV/SOC) # + Re-upload of 3.16.8 in the development track. # Version 3.16.8 - 2002-07-22 (JBa) # + changes in implementation files in order to comply with ANSI C++ # Version 3.16.7 - 2002-07-01 (UL) # + changes in various source files to render usage of 'stringstream' # standard compliant # Version 3.16.6 - 2002-05-14 (DH) # + Fix bugs in combining of data subspace ranges. Closes SPR 2865. # Version 3.16.9 - 2002-07-23 (GV/SOC) # + Restore as it was at version 3.16.6, as changes in .7 and .8 # were meant for the release track. # Version 3.16.8 - 2002-07-22 (JBa) # + changes in implementation files in order to comply with ANSI C++ # Version 3.16.7 - 2002-07-01 (UL) # + changes in various source files to render usage of 'stringstream' # standard compliant # Version 3.16.6 - 2002-05-14 (DH) # + Fix bugs in combining of data subspace ranges. Closes SPR 2865. # # interpr 1.15.2 1.15.3 # Version 1.15.3 - 2002-09-17 (GV) # + (PerlInterpreter.cc) adjust constructor as a consequence of utils # 1.95 in the RT. # # mssllib 2.18.1 2.20 # Version 2.20 - 2002-10-18 (CB) # - Uploaded into release track # Version 2.19 - 2002-10-03 (CB) # - DEPEND file has been updated # Version 2.18.2 2002-05-23 (CB) # - (+src/frametime_mod.f90) - Checks added to stop program crashing # if an index of the array windowframetime is out of bounds (fixes # SPR 2845). # Version 2.18.1 2002-01-25 (VNY) # - (+src/numerical_mod.f90) - The subroutine DLOCATE in the # module numerical_mod.f90 can crash if the input xx-array # consists of only one element. Protection against this # potential crash (subscription message) has been added (SPR 2702). # Version 2.18.2 2002-05-23 (CB) # (+src/frametime_mod.f90) - Checks added to stop program crashing # if an index of the array windowframetime is out of bounds (fixes # SPR 2845). # # oal 3.91.6 3.92 # Version 3.92 - 2002-06-20 (UL) # + hasAssociatedSet()/associatedSet() now works for PN DLI data # (association is made by searching for CCD number match in # DLI exposures not later than 15mins after science exposure) # + internal code change to work around out-of-mem compiler problem # at -O2 on Tru64 # Version 3.91.8 - 2002-05-28 (UL) # + changed text of new error message introduced with 3.91.7 # Version 3.91.7 - 2002-05-24 (UL) # + issue error message if used with skeleton summary file (odfingest # has not been run) # Version 3.91.8 - 2002-05-28 (UL) # + changed text of new error message introduced with 3.91.7 # Version 3.91.7 - 2002-05-24 (UL) # + issue error message if used with skeleton summary file (odfingest # has not been run) # # param 1.68 1.68.4 # Version 1.68.4 - 2002-12-09 (GV) # + (tools/listparams) new devel tool to be used in the creation of # comman line completion files. Give a task name it lists all of its # parameters to stdout. # Version 1.68.3 - 2002-11-13 (JBa) # + Fixed test failures: only mode must be one of "q|h|" only. # Version 1.68.2 - 2002-10-29 (GV) # + DEPEND: add selectlib. # Version 1.68.1 - 2002-01-28 (JBa) # + (src/XpiInfoReader.cc) Check for appropriate value of parameter mode # # sas 1.287.26 1.315.13 # Version 1.315.13 - 2002-12-10 (GV) # + (bin/createcompletionscripts) remove -s flag when creating bash file. # Version 1.315.12 - 2002-12-09 (GV) # + (Makefile.top) at end of make check creates shell command line # completion scripts in SAS_DIR. # Version 1.315.11 - 2002-12-06 (GV) # + (Makefile.top) complete target now automatically generates # sas.pref (preferences) file in config directory. # Version 1.315.10 - 2002-11-21 (GV) # + (ftpsas) preserve exit status in END block, otherwise it is # always reset to 0 because the END block is guaranteed to succeed. # + (Makefile.top) do not echo the uploadreport command. # Version 1.315.9 - 2002-10-31 (GV) # + (ftpsas) allow one to specify a name other than 'make' for GNU # Make. Add more protection to chdir/mkdir statements to prevent # ftpsas from unpacking packages in the wrong directory. # Version 1.315.8 - 2002-10-14 (GV) # + (sasglobal.tex) task{} macro creates bold text in ps doc (SOC-SPR-2318). # Version 1.315.7 - 2002-10-11 (GV) # + (Make.include) AKA=5.4.0-rt # + (bin/chkdist) invoke parselayout in a different manner to avoid # problem described in SOC-SPR-2357. # + (bin/uploadreport) make quiet so cron jobs don't talk. # Version 1.315.6 - 2002-09-30 (GV) # + (Make.include) update AKA field to be 5.3.x-rt. # Version 1.315.5 - 2002-09-24 (GV) # + (src/runtestalarm.cc) allow one to set the maximum allowed # duration of a single test harness run via the environment variable # SAS_TEST_TIMEOUT. # Version 1.315.4 - 2002-09-20 (GV) # + (ftpsas, SasServer.pm) small updates to log/error messages and # documentation to clarify what is happening. # Version 1.315.3 - 2002-09-20 (GV) # + (chkdist) now get rid of the checks on the task.info files. # Version 1.315.2 - 2002-09-20 (GV) # + (chkdist) relax also the check on the ChangeLog files. # Version 1.315.1 - 2002-09-19 (GV) # + (chkdist) does not require that package sas be in DEPEND file, # as this check is too strict in current RT. # Version 1.315 - 2002-09-19 (GV) # + (configure.in) accept Qt version 3 instead of stopping. Change # use of tr when checking for ftools version to eliminate warning # message in linux. # Version 1.314 - 2002-09-17 (GV) # + added backward-gcc2/streambuf # + Make.include: make it possible to upload package sas with make upload. # Version 1.313 - 2002-09-12 (JBa) # + added backward-gcc2/istream # Version 1.312 - 2002-09-01 (GV) # + (Make.include) implement INTERNALS correctly (it was referencing # EXTERNALS). # Version 1.311 - 2002-08-29 (GV) # + (bin/ftpsas) split one line in two as suggested in SOC-SPR-2333. # + (bin/ftpsas) when --patch is given (incremental builds) before a # package can be unpacked the following is done: # . cd package-directory and make clobber # . rm -fr package-directory # Version 1.310 - 2002-08-01 (GV) # + (bin/ftpsas) supply 0777 mask to all mkdir calls, as the mask is # mandatory in perl 5.005. Also, detect which of MD5 or Digest::MD5 # is present and use it. (The perl modules MD5 has been removed # Digest::Md5, with exactly the same interface and functionality.) # + Pod::Usage.pm: define $progpath to be simply perldoc, so that it # works even when perldoc is not in the same bin directory as perl # itself. # Version 1.309 - 2002-07-29 (GV) # + (configure.in) die if ds9 not >= 2.0. # Version 1.308 - 2002-07-29 (GV) # + (Make.include) Missing '/' in fix made in previous version. # Version 1.307 - 2002-07-26 (GV) # + (Make.include) If the gcc backward compatibility directory is # needed, takes it via -I$(SAS_DIR)/include and not $(INCDIR), or # compilation of c++ packages that need it will fail when those # packages are built in a subdirectory of SAS_PATH (SOC-SPR-2331). # + (Make.include) Add directive PERLDIRS for subdirectories that # should be linked directly under lib/perl5, so that external # modules can be easily available to all scripts. Add PERLMODS # directive for individual modules. # + Move SasServer to lib, and make it a PERLMODS. # + Add Pod::Usage as a PERLDIRS so that ftpsas works also with perl # 5.005 without installation of additional modules. # Version 1.306 - 2002-07-18 (GV) # + (sas.bib) add entries for DS9 and GAIA, as per ims request. # Version 1.305 - 2002-07-18 (GV) # + ftpsas had been left in package devel. Moved here. # + (in)checkReport: change the color coding. # Version 1.304 - 2002-07-12 (GV) # + (bin/Makefile) I had left out uploadreport from DEVSCRIPTS. # Version 1.303 - 2002-07-11 (GV) # + (Make.include) add targets distcheck and depcheck, so that it is # possible to run these checks independently. # + (bin) add all of the scripts that were in package devel, so that # the latter can easily be taken out of the manifest when a public # binary is built. # Version 1.302 - 2002-07-09 (GV) # + (chkdist) make it an error not to DEPEND at least on package sas. # + (chkdist) make it an error not to have a ChangeLog entry # matching the version number. Also, the matching entry must be the # first one in the file. # + (chkdist) make it an error not to have a GROUPS entry in the # task.info file. # + (Make.include.in) expand the range of targets executed in a make # incheck and make update. Preparation for incremental builds. # + (configure.in) switching sharedversion on forces shared to be on # as well. # + Change the maximum single test harness duration to 600s. Change # implementation of the timeout cndition to use system instead of # exec, so the alarm signal can be trapped. # + incheckReport: added to report on incremental builds. # Version 1.301 - 2002-07-08 (GV) # + (Make.include) run test harnesses through runtestwrap. This sets # the maximum CPU time per test harness to 1000s, then runs the test # harness through runtestalarm, where the maximum wall clock time # per test harness is agains et to 1000s. This to prevent problems # with hanging test harnesses, or test harnesses that enter an # infinite loop. # + (bin/runtestwrap) added # + (src/runtestalarm.cc) added # Version 1.300 - 2002-06-27 (JBa) # + Preparation for GCC 3.1 # Added backward compatibility directory for GCC-2.9x # Version 1.299 - 2002-06-27 (JBa) # + (test/check_dev_bins_scripts) make sure it works if current # directory is not in PATH # Version 1.297 - 2002-06-11 (JBa) # + As the HTML documentation, the PostScript documentation now also # contains a Parameter header. (SOC::SPR 2323) # Version 1.296 - 2002-06-10 (GV) # + configure now works with the latest autoconf (now required). # Version 1.295 - 2002-05-13 (GV) # + (Make.include.in) make sure all tasks are getting selectlib on the link # line. # Version 1.294 - 2002-05-07 (GV) # + (chkdist) validateParameters is called only for XPI-style files. # Version 1.293 - 2002-05-02 (GV) # + (Make.include.in) add selector to USEDLIBS when param is also # used. This is needed to support param-2.0. # + (Make.include.in) add DEVTASKS directive. # + (Make.include.in) $(TASKHEADIMPS) are removed on the clobber and # not on the clean, so incremental builds can work. Also, all the # autogenerated code is now dependent on some of the source files in # package taskmain, so that it is re-created only if taskmain has # been updated. # Version 1.292 - 2002-04-29 (GV) # + (Makefile.top) adjust target binary_exclude to exclude files in # bin/devel, lib/data/tmp, and lib/data # + (configure.in) checks for mysql lib/header, set HAVE_MYSQL if # ok. Also check for some of the CERN libraries. # + (acconfig.h) updated. # + (Make.include.in) add ODFDIRS for symlinks under lib/testodf. # + (Make.include.in) all tests now run with stdin from /dev/null, # so that running some ftools will not hang the build. # + (chkdist) issue warning if no ChangeLog entry for VERSION is found. # Version 1.291 - 2002-04-28 (GV) # + (Make.include.in) change a couuple of SAS_DIR/bin to SASBIN, # as the former no longer contains the development scripts required # for the build. # Version 1.290 - 2002-04-27 (GV) # + (bin/Makefile) fix DEVSCRIPTS (was mispelled). # + (Make.include.in) re-introduce changes made at 1.288 that had gone # missing. # + (test) add test harnesses for DEVSCRIPTS and DEVBINS targets # Version 1.289 - 2002-04-26 (GV) # + (configure.in) enforece cfitsio > 2.400. # Version 1.288 - 2002-04-26 (GV) # + (Makefile.top) create extra directories (lib/data/tmp lib/data # bin/devel). # + (Makefile.top) new target uploadreport # + (Make.include.in) add target updateparfile for transition to # param-2.0. # + (Make.include.in) introduce DEVSCRIPTS and DEVBINS, similar to # their DEV-less namesakes but to be linked under # SAS_DIR/bin/devel. sas-setup.[c]sh adjusted so that # SAS_DIR/bin/devel is in the PATH. # + (bin/Makefile) change SCRIPTS to DEVSCRIPTS # + (uploadreport) issue error if it cannot ftp to SOC server, # instead of dying with an undefined variable. # + (Make.include.in) introduce DATADIRS target for directories that # are linked under lib/data # # # selectlib 4.46.5 4.60.1 # Version 4.60.1 - 2002-11-26 (UL) # + minor transparent change in Region.h to support more user-friendly # selection of background regions in ds9 # Version 4.60 - 2002-08-26 (UL) # + fixed problem with combi-lib building (caused linking failure under # Tru64) # Version 4.59 - 2002-07-31 (UL) # + added selectReleaseMemory() to src/service/datafilter.f90 # Version 4.58 - 2002-07-29 (UL) # + fixed problem with broken rgsregions due to 4.55 change in Region.h # Version 4.57 - 2002-07-22 (JBa) # + (src/utils/TriangulatablePolygon.cc) making sure we pick up local # INFINITY definition (GNU stdc++ library defines INFINITY in cmath) # Version 4.56 - 2002-07-19 (UL) # + various trivial C++ standard compliance fixes (code is gcc-3.1-clean now) # Version 4.55 - 2002-07-10 (UL) # + transparent modifications to GeoRegion class # + implemented funtools/CIAO compliant region combination policy # (Venn diagram can now be generated with within one operation) # + added new test harness # Version 4.54 - 2002-07-09 (UL) # + added f90 I/F to ExprColumnGenerator class (construction of table # column driven by arithmetic expressions) # Version 4.53 - 2002-06-28 (UL) # + changed all occurences of 'strstream' to standard-conformant # 'stringstream' # Version 4.52 - 2002-06-10 (UL) # + minor addition to OGIPgti class # Version 4.51 - 2002-06-03 (UL) # + added support for time and angle parameters # Version 4.50 - 2002-05-29 (UL) # + Trigonometric functions and their inverse now use radians # Version 4.49 - 2002-05-29 (UL) # + Allow single-quoted text literals (to faciliate string parameter # validation in param>=2.0) # + more robust identification of string identifier in textual contexts # Version 4.48 - 2002-05-27 (UL) # + added support for vector algebra # Version 4.47 - 2002-04-22 (UL) # + treat identifiers in textual contexts properly # # ssclib 2.4 2.4.1 # Version 2.4.1 - 05 Jun 2002 (IMS/LUX) # - Fixed SPR 2868 (on rgssources). It was a 'status' in coordinate_mod # that was not initialised. # # taskmain 1.67.2 1.67.5 # Version 1.67.5 - 2002-11-21 (JBa) # + fixed SOC-SPR-2371 # + Fixed Repository ... now under branch 1.67 ;-) # Version 1.67.4 - 2002-11-04 (UL) # + added description of new environment variable SAS_RAND_SEED (as of # utils-1.98) to documentation # Version 1.67.3 - 2002-09-20 (GV) # + (main.cc) use sstream instead of strstream. # + (perltask.cc) add final c_str() to initalization of perl # interpreter. # # testccf 1.96.4 1.98.1 # Version 1.98.1 - 2002-10-14 (GV) # + remove copy of EPN_CTI_0009.CCF, as the RT should be sensitive # to whether this file has been released or not. # Version 1.98 - 2002-07-26 (UL) # + fixed problem with wrong numbers in constituents/EPN_CTI_0009.CCF # Version 1.97 - 2002-07-26 (UL) # + in constituents/ccf.cif: # EPN_CTI_0008.CCF -> EPN_CTI_0009.CCF # Version 1.96.5 - 2002-06-11 (GV) # + Changed the order of USED libs in test directory. Hopefully, # that will make the static build succeed. # # utils 1.83.2 1.98 # Version 1.98 - 2002-11-04 (UL) # + SAS_RAND_SEED environment variable can now be used to control seed # of random number generator singleton (documentation is in taskmain) # Version 1.97 - 2002-09-20 (GV) # + (boost/config/compilers/gcc.hpp) make it work with gcc-3.2. This # is a temporary fix: it should actually use the (not yet released) # boost original. # Version 1.96 - 2002-08-15 (UL) # + fixed minor problem in f90 I/F to STime (added a generic ST_release() # interface) # Version 1.95 - 2002-08-01 (GV) # + (src/boost/config/compiler/gcc.hpp) undef BOOST_HAS_THREADS # because we never use threads, and because otherwise boost does not # compile on Tru64. # Version 1.94 - 2002-07-29 (UL) # + new constant in STime.h # Version 1.93 - 2002-07-26 (GV) # + Add more of boost: tuple, smart pointers. # Version 1.92 - 2002-07-10 (UL) # + added parts of boost (http://www.boost.org) library # Version 1.91 - 2002-07-04 (JBa) # + (src/stringutils.h) # This is a temporary hack, as task developers implicitly expect # the inclusion of strstream in stringutils, where sstream should # be used instead. # Once we really aim to port to the standard, # developers should use sstream # Version 1.90 - 2002-06-27 (JBa) # + Preparation for GCC 3.1 # Version 1.89 - 2002-06-10 (GV+UL) # + added complete loki library (http://moderncppdesign.com). # + added STime::decimalYearNumber() # Version 1.88.1 - 2002-05-07 (UL) # + fixed bug in RandomNumberGenerator::minMaxRange() method added in 1.88 # Version 1.88 - 2002-03-25 (UL) # + added to RandomNumberGenerator (Random.h) class two convenience # methods [minMaxRange(min, max, range) + pushState(min, max, range)] # Version 1.87 - 2002-03-19 (UL) # + fixed problem in Random.h related to 1.85 update # Version 1.86 - 2002-03-19 (GV) # + (Ranlux.cc) remove errstr.h (not available). # Version 1.85 - 2002-03-18 (UL) # + validity check in random number generator initialization # Version 1.84 - 2002-03-13 (UL) # + extended functionality of RandomNumberGenerator class # [can now set range type (open, closed, semi-open)] # # Parameters # ---------- # Pipeline infrastructure # ----------------------- # # pcms 4.4.12 5.2.5 # Version 5.2.5 - 2002-12-16 (DJF) # + added DATE keyword to the product index # Version 5.2.4 - 2002-11-12 (DJF) # + Added search on osw_id, order and rgsorder to findFile # Version 5.2.3 - 2002-07-25 (DJF) # + Added RGS FITS SOURCE+BACKGROUND SPECTRUM product to Filemap. # Version 5.2.2 - 2002-06-26 (DJF) # + SearchUSNO columns MAG_R and MAG_B changed to RMAG and BMAG respectively. # Version 5.2.1 - 2002-05-22 (DH) # + Change to the way waitDpss and waitAcds health flags are handled. # These now get clear if the corresponding upstream module (SendDPSS or # SendACDS) gets changed to the waiting state. The waitDpss flag no # longer inhibits processing of a sequence. # Version 5.2 - 2002-05-17 (DH) # + Change ModuleManager.pm so that 'waiting' modules can be paused and # uppaused. Modify gui so it can be used to do this. # Version 5.1.6 - 2002-05-15 (DH) # + Use -f option for gzip in the ProductGroups module when compressing # files for inclusion in the PIPE file. This is so if the compressing # process dies in the middle, the old compressed files won't get in the # way of the new compressed files when the process is restarted. # Version 5.1.5 - 2002-05-15 (DH) # + Fix bug which was making it so that SendACDS module could not be # reexecuted. # Version 5.1.4 - 2002-05-14 (DJF) # + Change BlackBoard.pm to fix new locking code which was being ignored. # Also added debugging statements. # Version 5.1.3 - 2002-05-13 (DJF) # + Change BlackBoard.pm to use sysopen and file locking to raise/lower and # check flags. This is a suspect in the intermitent pcms segfaults. Perl # has a race condition between (-e "$file") and open(FH,"$file") which # could be hit by parallel raise flag and check flag streams. # Version 5.1.2 - 2002-05-03 (DH) # + Fix long standing bug in blocking of problem sequences. Now no new # modules will queued in a problem sequence unless --noblocksequence # option is set. # Version 5.1.1 - 2002-04-29 (DH) # + Take tigris out of the pcms configuration, as it needs to be repaired. # Version 5.1 - 2002-04-04 (DH) # + Add graphics products for the EPIC EXPOSURE MAP and the EPIC EXPOSURE ML # SOURCE LIST to the list of products in Filemap.pm. These products will # only be produced in the catalogue pipeline. # Version 5.0 - 2002-04-02 (DH) # + Fix problem with executable log product having repeats of the same # log files. # Version 4.7 - 2002-04-02 (DH) # + Change code which gzip's products before putting them in the product # group files. Products should be unchanged, but hopefully the gzipping # will go much faster. # Version 4.6 - 2002-03-11 (DJF) # + Add catalogue as an 'instrument' to filename creation (cat => ca) # Version 4.5 - 2002-03-04 (DH) # + Add '-w 10' option to all sas commands, in order to keep log files from # blowing up. Change in ModuleResources.pm. # + Add /usr/local/ftools/SunOS_5.6_sparc/syspfiles to PFILES variable in # command enviroment. Needed in some cases for ftools commands. Change in # ModuleResources.pm. # + Add getEventBitmask subroutine to ModuleResources.pm, to allow a more # transparent method for selection FLAG column bit mask patterns. # + Add duplicateCheck subroutine to ModuleResources.pm, which checks for # more than one copy of an observation running in the production pipelines.