XMM-Newton Image Gallery

 Go to the Gallery Home Page

 XMM-Newton Home > Gallery Home > XMM-Newton > Mirrors > XMM-Newton telescope

Technical drawing of one of the XMM-Newton telescopes

Image

Minimum credit line: Image courtesy of ESA. (for details, see Conditions of Use).
Credit: ESA/XMM-Newton, CC BY-SA 3.0 IGO

The image above can be displayed at full size and may be downloaded by clicking the image above.

About this Image

The 58 Wolter I mirrors of each telescope are bonded on their entrance aperture to the 16 spokes of a single spider made out of Inconel. The spider is connected to the support platform via an aluminium interface structure (the MIS: Mirror Interface Structure) consisting of an outer cylinder and an interface ring. On two of the modules, the ring interfaces the mirror module to a Reflection Grating Assembly (RGA). To minimise the mechanical deformation of the mirrors and therefore the optical degradation, the flatness of the interface between the spider and the MIS had to be better than 5 micron X-ray baffles are located in front of the mirror systems. They act as collimators and reduce considerably the amount of straylight in the field of view of the focal plane cameras.

For More Information

Alternate Resolutions   (Help)

This image is available in the following downloadable versions: Higher resolution versions of this image may be available, please contact the XMM-Newton HelpDesk.



Search the Image Gallery

To search the Image Gallery for a particular object, fill in the object name in the box below and click the Submit button.
Object Name Show Results As:  
To search the Image Gallery for other images, fill in any of the fields below and click the Submit button.
Category Sub-Category Instrument Show Results As: