XMM-Newton Science Analysis System: User Guide

6.1.3 Listing the OM Current Calibration Files

Table 11 provides a list of the OM calibration files. For a detailed description of these files and of their usage, the user is referred to the CCF Interface Control Document [5] (see § 1.2). Some of these files are only used by the real time PHS and QLA systems, although they are contained in the SAS file ccf.cif. The SAS tasks using a given CCF are indicated as well.

Table 11: Calibration files of the Optical Monitor.

File name	File Content	Usage
ASTROMET	coefficients for geometric distortion correction	omatt omdetect omdrifthist omgprep omgsource omphotom omsrclistcomb
BADPIX	bad pixels position, type of defect and the severity level	omcosflag omfastflat
BORESIGHT	alignment of the instruments and star tracker	omatt omgprep omgsource
COLORTRANS	coefficients for colour transformation into a standard system	ommag ommag omlcbuild omsrclistcomb
GRISMCAL	wavelength and flux calibrations for the grisms	omgrism
HKPARMINT	house keeping parameter ranges	ommag
LARGESCALESENS	flat field map (set to unity)	omflatgen
PHOTTONAT	correction coefficients of count rates for detector non-linearity and ageing	ommag omprep omdetect omlcbuild
PIXTOPIXSENS	flat field map (set to unity)	omflatgen
PSF1DRB	point spread function for each filter	ommag omdetect omlcbuild
DARKFRAME	dark current map	QLA
DIFFUSEGALA	intensity map of diffuse galactic emissions	PHS
QUICKMAG	a rough count to magnitude conversion table for different spectral types	QLA
ZODIACAL	intensity map of the zodiacal light and average spectrum	QLA
LINCOORD	parameters for calculations of instrument configuration	not used