The naming and structure of the PN Imaging Mode event lists is very similar to that of the corresponding MOS files (see Sect. 6.1 and Table 31). The main differences are:
The number of rejections of a CCD column (default) or row from the on-board Minimum Ionizing Particle (MIP) rejection algorithm is stored a DLI file (Discarded Lines Image File). One DLI file per CCD is produced and included in the ODF (see Sect. 4.1.5).
A short description of the column in each of the above extensions is given in Table 32.
Name | Units | Description |
BINTABLE EVENT | ||
TIME | SECONDS | |
RAWX | PIXELS | Event X-coordinate as measured by the detector |
RAWY | PIXELS | Event Y-coordinate as measured by the detector |
DETX | 0.05 ARCSECONDS | Physical camera X detector coordinate |
DETY | 0.05 ARCSECONDS | Physical camera Y detector coordinate |
X | 0.05 ARCSECONDS | Sky X detector coordinate |
Y | 0.05 ARCSECONDS | Sky Y detector coordinate |
PHA | CHANNELS | Pulse-Height-Analyser (uncalibrated spectral channel) |
PI | CHANNELS | Pulse-Invariant (calibrated spectral channels) |
FLAG | ||
PATTERN | Event pattern | |
PAT_ID | ||
PAT_SEQ | PIXELS | Distance from neighbouring event in same frame & column |
CCDNR | CCD identifier (1-12) | |
TIME_RAW | SECONDS | raw time stamps |
BINTABLE OFFSETS | ||
RAWX | PIXELS | Column number of the offset |
OFFSETX | CHANNEL | Column offset in ADU |
CCDNR | CCD identifier (1-12) | |
BINTABLE EXPOSU | ||
TIME | SECONDS | Frame central time |
FRACEXP | FRACTION | Fraction of effective time |
BINTABLE BADPIX | ||
RAWX | PIXEL | Bad pixel X-coordinate |
RAWY | PIXEL | Bad pixel Y-coordinate |
TYPE | 1: Hot 2: Flickering 3: Dead | |
YEXTENT | PIXEL | # of pixel in y column |
BADFLAG | 1: uplinked bad pixels; 2: CCF origin; 3: file origin | |
BINTABLE DLMIMAP | Discarded columns (default) or rows | |
DLIODF | PIXEL | - identified by the DLI files in the ODF |
DLISAS | PIXEL | - identified by the SAS |
BINTABLE CALINDEX | ||
TELESCOP | XMM | |
SCOPE | EMOS[1,2], EPN, RGS[1,2], OM, XRT[1,2,3], XMM | |
TYPEID | CCF constituent type | |
ISSUE | Issue number | |
VALDATE | Start of validity date | |
VALDATE-END | End of validity date | |
FNAME | Name of applied calibration file | |
DATE | Production date of calibration file | |
FSIZE | File size (bytes) | |
SUBDATE | Submission date | |
EXTSEQU | Extension sequence | |
EXTSEQUID | Extension sequence identifiers | |
MD5 | MD5 signature of constituents | |
CREATOR | CCF constituent creator | |
BINTABLE STDGTI | ||
START | GTI start time | |
STOP | GTI stop time | |
BINTABLE GTIZZ | only if additional time filters applied | |
START | GTI start time | |
STOP | GTI stop time |